Thanks for that. You been a great help!
Type: Posts; User: Norvenmunkey
Thanks for that. You been a great help!
Other than that, is it just a straightforward swap.
Hi. i have a lexmark XM1342, which keeps having a non responsive touch screen. i have updated firmare, reseated all cable to main pwb.
the screen works ok for awhile (3 days to a couple of weeks)....
thanks for the reply.have checked all toners all are OEM toners correct for machine. also noticed when front door opened and closed, message on screen changes to INVALID MACHINE CONFIGURATION. which...
machine saying toner not supported.
hi sorry taken so long to get back. tried panel calibration, all seems to be good. thanks.
have had an Epson wf-c 579r , when scanning /copying double sided. second side come out completely pixelated.
Hve updated firmware to latest. have done visual check of machine all seems ok
That would be great. Someone did mention to me
It was possible it could be the ops panel causing the problem.
Yeah sorry its a sl x 3280
Hi. Machine has had Hdd replaced. Error came back short time after.
have a samsung clx 3280 that constantly locks up screen , wont scan or screen un responsive. have done hdd recovery via usblist programme and updated
firmware. Machine works ok for a couple of...
Hi tonersniffer.
Had to strip top of machine off and replace top tray assembly.
Machine seems to jam and noise free. Wants to be after doing that.
No error code.paper does not always jam. paper sometimes exits, but you can see it juddering as the noise gets louder.
have taken top of machine off and inspected the top feed tray/redrive all...
Hi have an xc 4240 that stars printing ok, then after short time , makes loud noise. paper starts juddering on exit and then crumples up paper between fuser exit rollers and exit tray. motors seem to...
hi thanks for your input. found out customer was leaning light box and other elelcrical items, up against data cables, causing interference.
Hi have a few of these machines that constantly give L4-03. Have checked and replaced fuser and main charge unit.
Prints coming out barcode type lines. Image shifted in lines.
hi ya . have a clx 3280 that keeps sticking on logo screen. have done firmware and machine recovery. machine has had new hdd.
Hi arnh78. Cable seems ok. As I say copies/scans coming out as you had copied on to pale
Grey paper.
Hi tsbservice.
Hinges all ok. Background seems even.
Hi Crowfeather.
Scan or copy from glass. Image has grey background. Have checked scan ,copy settings. No apparent light seepage.
Have check scan lamp.unit,all seem ok.
Hi jack79.
Optics,glass etc have all been cleaned. Exposure settings checked
. Have also updated firmware. As I say only happens when
Copy or scan from glass. If fed through ADF all comes out...
hi have a samsung clx9301, when scanning from platen glass , scans or copies have grey background. all ok when using ADF