Hi.
Machine is on the latest firmware as of 10-12-23, no parts have been changed to cause this issue. Resetting Print Calibration makes the issue go away for a few days but it comes back.
Internal...
Type: Posts; User: Welsh Wizard
Hi.
Machine is on the latest firmware as of 10-12-23, no parts have been changed to cause this issue. Resetting Print Calibration makes the issue go away for a few days but it comes back.
Internal...
Hi.
I have exactly the same problem. Did you find a solution?
Speaking as an outsider looking in.
It's like watching two children arguing over which is best between two choices,
while they never understand that they have more than two choices to choose...
Hi. Have you tried rotating the auger screw on the rear of the toner cartridge to ensure that the toner isn't compacted and is able to be transferred freely?
I have had this fault be caused by the machine's CRUM connector for the drum to be forced backwards and is not making electrical contact sufficiently.
Remove rear cover, remove flywheel from main...
Those washed-out areas and raindrop patterns are caused by excess toner build-up on the Transfer rollers inside the Belt Assembly. Replace the belt but remove all toner from the rollers first,...
Hi. I'm after the latest firmware for C300i, please?