The weird this is if I connect that sensor the two sensors that are already connected would need to be disconnected there’s no way to have all the connections in place.
Type: Posts; User: dkaliahsan
The weird this is if I connect that sensor the two sensors that are already connected would need to be disconnected there’s no way to have all the connections in place.
When the PF-707m arrived the box did not have the big long sensor just the two above and below. Which was weird but in the installation manual its confusing because it says install it, but the PF-707...
I wanted to know which sensor is the one that should be connected the two small ones or the huge center one. Because it is not possible to have all the sensors plugged in.
the jam code I have is J-3140, paper will not pass the m3 part of my Minolta, and i recently received the centering sensor and installed it but noticed for the centering sensor to be installed I...
So basically when i do the IO test 28-16 comes up as abnormal and i believe the sensor is working because I'm not getting the sensor error code the error code is c-0130 and I replaced the two parts...
what if there is we no noise of the gears grinding or the gears are fine could it be the motor gone bad?.
I got 65535 does that mean the sensor is bad??
So I solved this situation, now I am getting a new error Code C-5109?
One more quick question if the machine isn't leveled correct? can i get a paperjam?, or that has nothing to do with it?
Is There some diagram or pictures of what I should look for?
The Code I got is C-0130
Hey Guys,
My Minolta C6100 is getting paper Jams at the M3 section, its not getting past that section, is there a solution for this, I got an error code of C-0130 when doing the paperless run...
Hello Guys and Girls, I had a quick question so on my Konica Minolta it states that controller not connected and the Fiery I'm using is external IC-313 are there any guides to help me connect it I...