Search:

It looks like you need to run SIM 63-3 with SIT chart (UKOG-0280FCZZ or UKOG-0280FCZ1) to calibrate the CCD. it is ADJ 10-A in the service manual.

What does DSD stand for when referring to the DSD collar or DSD holder assembly in the process unit? Thanks.

You can get drivers for the MX-M450 for winodws 10 64bit from Sharp Global.

Driver Downloads - Search drivers - | Sharp Digital MFPs / Printers

Lane

We used to have these squealing issues on the color machines. We would adjust SIM 43-32 so that the web advanced more often.

They are also bad about throwing FK4 codes too early. We break off the...

We used to get "stained" mag rollers on the AR-M450. We used to clean them with a Scotch Brite pad. I think we had it happen becuase we would try to run the developer 200K instead of 100K. I am not...

Replace the offending drum and main charge kit of the depleted developer also. The developer pulled for a reason.

We call them Sharshibas.

I agree. The MX-850BL works better.

Thanks Everyone. I found out from Sharp it stands for "Automatic Compression Recording"

An easy wasy to get better prints is to use Hammermill 28lb paper.

Hello,

I can't find what ACRE stands for the ENHANCED COMPRESSION KIT. Can anyone enlighten me?

Thanks

HP has a test fax service that will fax you back.
Test fax setup with the HP Fax Test Service | HP(R) Customer Support

1-888-HPFaxme (1-888-473-2963)

It is a common issue with this series. Go into SIM 8-2 and adjust the main charger grid voltage.

Try the MX-M450 drivers. They should work fine.