So far I didn't swap MC13 because before disassembling LU-202 I found out the following by coincidence:
When printing 80g/mē I get J-3102 no matter if A5 / A4 and 4/4, 4/0, 1/0
Now I tried...
Type: Posts; User: Robin (ACS Collective)
So far I didn't swap MC13 because before disassembling LU-202 I found out the following by coincidence:
When printing 80g/mē I get J-3102 no matter if A5 / A4 and 4/4, 4/0, 1/0
Now I tried...
also getting j-3102 on our C6000. Already changed the gears but now returns.
I got the clutch but even with the assembly drawing I am like blind looking for the place.
(in the manual I got at hand...
Journey continues:
What exactly is SETTING POWDER 000V-19-0?
Our Konica Dealer sent this instead of A1RFPP0000 Setting Toner.
As it is white and contains little plastic bubbles I guess I should...
Thanks but, no those screws were already gone.
I compared old and new units.
Another question:
Do you think I can use "A1RFPP0000 Setting Toner" for our C6000?
It says it was compatible...
hi,
i am getting 4661 on our C6000 after replacing transfer belt cleaning unit.
Didn't find any screws to be removed. But are there any?
funny:
still clueless about trouble reset. Boot holding reset does nothing...
Thank you Synthohol.
But switch 18 are all zeros.
(Being desperate tried also switching to 1, rebooting, switching to 0 again and rebooting ... all giving the same error when inserting the tray.)...
TLDR
getting C-0201 when inserting tray 1.
without tray 1 inserted all Ok (despite direct copying).
----
Hello everybody,
I had a totally rotten slide shaft holder (a03U812800) in my...
Hi. I got the same issue.
Jam: 0A08
Err: E351
Haven't found the code list so far.
Any news / hints?
Saludos!
Now I am constantly getting E000069-0000 which I think I found on page 6-108 in the manual. Is this correct?
52524
Additionally I got a hint saying "hvtr-value less than 300", which I do not...
Hello everybody,
is there a chance to trick the system of c6500 (Finisher: FS-612) to produce a brochure of size 110x174mm (paper=220x174)?
Given an A5 brochure I see that the staples have enough...
The stapler of our ir8500 stopped working - and its not because of a lack of staples.
Are there any hints?
Fixed:
I recognized this little fella was hanging to low and thereby jamming around every second sheet of paper.
51661
So I gently bent these two hangings with tongs in clockwise...
Yes, got that.
Eh sorry, kinda tapping in the dark here.
My machine's version info reads: PS/PCL 41.10
Is this the right thing?
How can I increase the PDF-printing speed of our ir8500?
I found this video:
https://youtu.be/atDzBSZSBPk
Unfortunately I do not understand what is said.
I contacted Rohit who kindly...
Yeah me :p
Any news on this error? I got C6000 and I am constantly getting c2720. I checked and cleaned the roller but nothing. Getting magenta lines on the roller so changed drum but still...
Hello,
does anyone have an idea where to get spare parts of
Triumph Adler CX 8682 ?
We are especially looking for the brown rollers like on the pictures attached.
As you see ours are...
Too soon.
Now I am getting a long list of 0110, 010c, 010b, 010c, 0110 and again a 010c.... :(
Haaa xD
All good now. I mixed PS10 with PS6. My picture is wrong ^^
Thanks.
I swaped it with PS16 and afterwards also with a completely new sensor.
Same result: 0A0C
So maybe the power cord is broken?
But before I go on trying on this I would love to know if my...
Hello everybody and thanks for all the infomation shared here.
I have been reading this forum for almost a year now and it has helped me through quite some struggle.
So here is my newest quest:...