Improve image quality of copying and printing
Type: Posts; User: zayonc
Improve image quality of copying and printing
Creating a icc profile is now in Accurio PRO Color Manager. PRO Color Manager.
I’m shocked, first they changed OACB and PRCB. No result.
In our case, after searching, it was PRIPB. Suddenly.
Need to reconnect both ends of the LPC cable. Usually helps
DV-012, DV-017
Перевод
The c2070 uses a processor cooler from an unknown Chinese manufacturer. I recommend replacing it with the Culling Master cooler from bizhub Pro 951 A4EUM77000. This applies to all models...
The arrow on the green handle points in the wrong direction so users break the gear. On the first c1060 this arrow pointed in both directions, then information appeared that it could only be rotated...
in the factory settings, stop is set only on the web roller. but it can be turned off
More than half of all bizhub 1100s have this problem. I doubt it's broken. can be stopped by disabling Image Stabilization Control DIPSW24-2 to 1.
a variety of colors without differences in packaging
58314possible reason
remove the tray and check the contacts on the connector
there is a whole procedure for replacing it and installing it in home position. read the manual
Everything fits from the 8 series
57562
FD-503 after G2, LS-506 must be removed. There is also a TU-510, they will like it.
this happens on the black and white bizhub 958 too
this was the Transfer Belt ~140%
You can have many density balance profiles and choose the one you want. It is better to do for a specific paper. On this model, this can be done using a scanner and it does not take much time.
There was such a problem on one of the eight machines. We tried everything, even rolled the device close to the server. The problem turned out to be in the SafeQ database.
new holders are more glamorous
56114
Everything is much easier. The gear clutch is slipping on the axle. Needs to be cleaned or replaced.
more or less like this
55708
There is a suspicion that the RU-510 after G2 is superfluous
And we need 2 MK-737