Initially that is what I thought, I thought by initializing it then the problem will reappear, enabling me to pin-point the cause. But even after initialization the error does not come back, and the...
Type: Posts; User: Ado Mmoloki Moepedi
Initially that is what I thought, I thought by initializing it then the problem will reappear, enabling me to pin-point the cause. But even after initialization the error does not come back, and the...
Hello, I have a Bizhub C364e on 345k clicks, the printer works properly with other trays (Tray 2 and 3) but it will not work or even show that there is a tray 1 on the machine. I have replaced all...
Ricoh MP2501sp
Good day, anyone with Experience on with the J050 jam code on a Rich Mono Copier. The paper Jams with a bit of it in the exit unit and most of it in the fusing unit.
Where you ever able to solve this. Having a similar problem on all trays, including the Bypass.
Where you ever able to solve the problem?
Did you ever manage to slove the problem?
Are you suggesting that I try and swap the motors?
Thank you for response, I will do that and see if the problem still persists. Otherwise I will end up just having to change the board.
Yes sir that is the one that I changed, I have also checked the wiring. It still perfect.
Regards,
Good day,
I am having a problem with my B554e KM, it shows a C-5102 error, I have changed the M1 motor twice now. When i changed it the first it immediately displayed the error but then I ran an...
Good day,
I am kindly looking for a B454e Konica Minolta Service Manual. ado.moepedi@gmail.com.
Any assistance highly appreciated.
Regards,
Hello mate, I am curious to know if you were ever able to solve the problem and what you did if you were ever able to.
Hello, i understand that it has been a while, but did you ever manage to sort out the issue?
Tried that and it worked. Thanks bro.
Thank you for this, already went through the SM. Was hoping that maybe someone has had a similar experience to reduce the troubleshoot time and effort.
I have a Konica Minolta Bzhub 758, it was working fine until a power cut occurred whilst it was still in operation. Now it is displaying the Error code c-6751. Anyone ever had this issue?
Yes, I also got 33-02 and 33-03 but i think that because of the messed up paper getting jammed up in other places.
The heat roller looks to have taken some beating from what I can see. Tried to upload a short clip but that failed. I think the problem maybe with the fuser as I have tried with fresh paper of better...
Yes in middle of the paper for those that make it out of the finisher but the one that cause jams are folded up a bit either before or after the Fusing unit.
I have a Konica Minolta Bizhub 758, I copied a 10 original page for 100 copies document in the morning without any problems, now I am trying to do another 100 copies and some papers seem to be a bit...
Ok thank you.
Having a similar problem, Machine asking for Toner.
What may the problem?
It's a Bizhub Pro 1100. I'll consider that even though I don't have the budget for a tech at this point.
The consumables are ok, I checked them before the machine gave out. There was a toner spillage, not a small amount too, a lot. One of the staff members tried to remove the toner bottle incorrectly...