Hello, i have hp 1102 which prints at start normally and after little prints gears is run faster and paper not picked up. When i turn it off for a while it starts normally again for some prints and...
Type: Posts; User: Uniquer
Hello, i have hp 1102 which prints at start normally and after little prints gears is run faster and paper not picked up. When i turn it off for a while it starts normally again for some prints and...
I have a faulty lexmark copier power supply e463.
The board is unavailable in my country but what is available is a lexmark printing only power e462 that has the dame connections.
My question is do...
Just try another reader board sometimes it has been the issue
It may be toner type is not okay,check transfer roller is in its place.
You may attach a picture to see more obviously the problem
I have to replace my main controller for canon adv 6055
Some sites have part fm4 5300
And others fm3 9206
What no. I should buy (the model of mine is fm3 9206 that need to be replaced)
Mostly it is the laser
Pull out the drum unit
A lever is pressed by drum to open the laser cover,open it with your hands and clean the glass
It should work
Just go to service menu
Go to fumction- clear jam and clear mccon and clear dc. Con.
It should work if not it may beadf controller.
I have a canon 6055 adv. When i switch power on the green light lit with no indications of life and after 10 mins approx it works great but when i come back from standby mode it takes the same time...
A black streak at the top of print or copy.
I already replaced unit drum , developer , transfer from a known good machine but no hope.
Surprisingly, when I replaced corona it worked for some...
You dont need a software you moatly need the. Right driver
Just download ufrii driver nothing else
Solved..as you suggested, thanks
Thanks for reply
I replaced hdd with the same issue
Do all types of clears in the function mode and intialized hdd but nothing working.
I cleaned both rams but the same problem.
What i do...
When i power it up the power led only light up but nothing on screen for about 5 minutes then loading screen comes up and works normally then.
Unfortunately, I replaced HDD with another one from a working machine, it worked directly but the same problem.I suspect now the controller but power supply is excluded idea I think.
I have a canon 2545 that jam for the first copy in the day if it passed the duplex any suggestions
Enter service mode by press service key then 2 and 8 then service
Go to feeder then adjust
Then minimize feeder paper guides to the smallest and from screen select a5r size then it will give...
I have a Canon 6055 which when i pull power button on it take a while to give load screen then it work.
I suspected the hdd , I have another hdd with firmware ,if I do swap it will work directly or...
Then how to get the image file if it is corrupted on the sd card??
I suspect files is corrupted not the sd itself!!
I know cloning but files already corrupted right
I replced it with an old 256 mb sd card but it gave me an error 6 may be and a white screen..does that relate to its size or something else..thanks much for help
Displays 0 only
I have a Xerox 5875 that I plugged off power cable while its booting up.
Now it gives the green screen with booting up in the top.
And nothing in the top of screen appears and stuck on that.
I...