Hi there!
I have tried to look after a guide how i can easy change the Proof tray Junction gate, but havent found any soulutions yet.
I dont want do open up the whole thing to just change that...
Type: Posts; User: brodera
Hi there!
I have tried to look after a guide how i can easy change the Proof tray Junction gate, but havent found any soulutions yet.
I dont want do open up the whole thing to just change that...
Hi!
We just got a machine back and i want to change some settings on it.
I need to know the standard password on the machine (Not Webinterface password)
Fast help is needed.
Thanks
/BR
Dont forget the sheet in the frontcover to restore the proper settings.
Check if the paper slides from any feeder. You should hear if the paper slides if you standing close to the left side of the machine.
whats the thickness on the paper? I have tryed 120g paper with no paperjam. Our clients manage to make 160g paper without any jams, but drums get worn off really fast for them.
We got the same prob in Swe to. To solve this problem is to change the Dev unit. but if you dont have any dev units to change with, try to poor out the dev on a pice of A3 paper and do the Cocain...
Jag är en tekniker = I am Technician :)
SC399
D Drum motor error: Y
The motor is trying to rotate at power on or during normal operation but there is an
excessive load on the drum shaft. The motor has no traction (due to a bent...
i think you can put any HDD in the machine since it only will operate 80gb. When you have installed the HDD do a format on it.
Rebuild the Fuser. if it still pop the code. try another Power-Sup.
We had the same problem. it ended up that we change the Fuser/Power-sup/Bicu/NwRam.
I hope you have more luck then we had :)
...
I agree to Clutches! Check those out!
We had this problem once, and it was the HD that cause this. So try HD as some of the guys recommended :)
Best Regards
Yea try the PCL5c driver. It has never faild me yet :)
Hi!
Just got a call that a MPC2800 shows SC503. Lift tray from the LCT. I solved it by telling the customer to unplugg the powercord.
Since this can just pop up out of nowhere, is there any...
send me a PM with your mail and i send it to you.
you need a SD card for this also.
ill send you a guide how to upgrade the language!
have you checked the sensor/sensors
ooh man.. This was a tricky one :)
Think you should clean the Shutter Glas with that Blue thingy (Toner on that glas can make prints light in my experiance) and do a force toner supply?
You can always format the card to 1GB. Its hard for us in sweden to find 1GB SD card so we bought 4GB cards and formated them. Works like a charm :)
does it really fits? have you checked if the model can handle SR790?
Humm. This is strange.
Did as i always do when i put up a Folderscan again for my client and now its finaly working!!
Thanks for reply!
OK! I will try once again today.
The picture im showing you is to a Laptop at my office. Same problem here and at my clients office...
Its good that the problem showed up here so i can LAB alittle with it.
Still no clue whats...
Imageshack - scannnn.jpg
*Dont mind the \ in the path name. i tryed both*
Still Error.. :(
already checked that.. and there is no blocking what so ever.. all the rights to the specified folder is correct.
I will try to setup a simular Folderscan here at my office and se if it works...