Got unit working, thank you all for the advice
Type: Posts; User: Walter Chavez
Got unit working, thank you all for the advice
Replaced fuser and need to reset web roll count or fuser count, also need to adjust background density, getting dirty copies
pregunta: ha tratado de cambial el mechanismo donde va el revelador cyan
Have Docucolor 260 with error 062-380, have check for anything blocking the light path, cleaned outside and inside the glass, all mirrors and lens, exposure light is good and white reference strip...
I change the Fuser and reset the error, had to do it twice to reset.
Thanks you all
I have a AR337 with the H4-01 error, I got new fuser on the unit with the same result. What else can I check or do?, ASAP please.
Thanks
Walter
No , the toner waste goes at the bottom of transfer belt
That's good, but you should not blow the excess toner, but you should vacuumed it or wipe it. The reason for it is that the dust may block the registration sensors, plus other sensors and the...
you are right, the 310 error is the cover open error, you could have a bad switch, try adjusting the switch metal actuator up(bend it), or replaced the switch, make sure nothing is obstructing the...
Blackcat4866, I appreciate your help, however I did not explain myself properly, what I wanted to find out was if the laser shutter unit could be faulty or if I should check the corona first....
What do you mean by Laser shutter code?
Try Motek @ 972-242-1203
I have a customers unit that after they moved and turned on the machine
get error " E000061-0001", the unit turns on and initializes, when attempting to make a copy it takes the paper thru the...
I have a customers unit that after they moved and turned on the machine
get error " E000061-0001", the unit turns on and initializes, when attempting to make a copy it takes the paper thru the...