I'm unable to perform the toner curve adjustment without error, either thru sim, or adj maint.
When done thru sim it errors s003, when done thru adj/maint it says to check the original...
I've made...
Type: Posts; User: kenoking
I'm unable to perform the toner curve adjustment without error, either thru sim, or adj maint.
When done thru sim it errors s003, when done thru adj/maint it says to check the original...
I've made...
Fuser rub off.Installed New fuser same issue. Runs 1st page with rub off in center. Firmware up to latest for this model. Checked fuser temps after 5 page run, Middle and end were at 165-167 Sim 199)...
Blackcat, you are awesome. I set up two guiey printers and named them label and envelope, so when you print whala you can select any damm printer you need.
Now I just need to train folks not to...
TXS again sir!
I'm not quite understanding where the change needs to be made Blackcat. I do appreciate the holler out though. (printer settings within word have MP tray set as default).
I'm unsure how to reach...
So I need to pick your brains. When printing from word in mailings, word completely ignores what the MFP is set for. MP tray, labels or envelopes etc and just pulls from drawer whatever. Is there a...
May I ask why you need the complete Transport section as all the seperate parts are Avail?? What's going on with the machine? Duplex jams lol...Coding?
When you say door assy, do you mean the complete transfer, duplex, bypass assy???
As Blackcat said. I would ceratinly pull all drums, dv units and vac real well. Pull drums out of cleaning units, remove blade and check the augers are not snapped and just builing up toner in...
Some of the first fusers had the incorrect grease applied from factory and would piss away way shorter than lifespan. Put a new fuser in they are cheap! Also insure it is the fuser making noise as...
Thank you anyway sir. As it turns out, the DP from the 3660idn will work on the 3655idn but not the other way around. Just in case you have the issue ( top cover jam removal) pivot in rear cracked in...
Thank for all the input. lol so it turns out they are Multifeed Transponder and receivers. Feeder will not function with Connector unplugged fror them C-9200.
Will not fit the 3655idn or vise versa.
OK, so can anbody tell me what the TX/RX sensors do in a Dual scan M3660idn???
As they are not in the M3655idn dual scan feeder and the DP's themselves have different part numbers completely.
Can a...
Anybody else have issues tring to sign in to kyoceras website today 2/13/2023 ????? Tried 2 differant browsers, same error.
Looking for service entry to check fuser speed for voiding on long prints. Had a manual, then had a flood in business. Manual go bye bye.
Any help would be appreciated. I found 7170k online but not...
Set 346, and to avoid replacing a $400.00 part, go get yourself some liquid nails (fuse it)! If there is no other wear on belt or PR, lube PR bearings, Then carefully blow out fuser endcaps, score...
Main charge grid shorted. Burnt the drum probably. Dumpster that machine, way so obsolete brother.
Thanks for the reply. Customer is bringing into shop. Better he than the Beast. Would be funny if it were that simple. Again TXS
Simple fix. Find an old KM model that the front cover was held with magnets. Remove and take magnet assy apart. (plastic holder). Discard holder. Open Imaging cover. Then place magnet on the metal...
FS-c2526mfp. Client reports after changing toner, the removable memory indication is stuck on the screen. No Memory sticks are installed. Dimm re seated. Any Thoughts?
My Bad, I found it..Thanks for the looks..:)
1st one of these out of box, what may I ask or where may I ask is the envelope with the Model,Brand badges and activation (Enter the brand code shown on the envelope included in the kit.)? Nothing...