Yes, both the top lid and the back panel are closed, otherwise the printer does not start the "adding toner" step before telling to replace the cartridge
Type: Posts; User: 42RedPandas
Yes, both the top lid and the back panel are closed, otherwise the printer does not start the "adding toner" step before telling to replace the cartridge
No difference.
Is there a way to check/edit the values detected by the chip of a toner, to see if the problem is solvable by resetting the chip? If so, are there any reference material I could check...
Tried multiple times but it didn't work.
Weird thing though: even when I took out all the toners and powered on, the only toner the printer asked to be changed was the black one.
Could it be a...
The printer started with original toners, and the black one (which I still have and presents the same issue) had more that half its toner left (according to the status page).
The problem, as said,...
Thanks for the answer!
If understood correctly, I think the gears are actually coming out properly.
This is on the right side of the printer, where the toner is collected (with the lid completely...
Hi,
I have an issue with this this old Kyocera 5250 model where it asks for toner replacement right after a fresh toner change.
This happened specifically for the black toner (a TK-590 K model),...