Hi all,
Doing a favor for my mother in law. Has TONS of 4x6 glossy lab photos. Just old family stuff. I've been running them through the ADF on my Bizhub c454e. I've had great success with this in...
Type: Posts; User: frood
Hi all,
Doing a favor for my mother in law. Has TONS of 4x6 glossy lab photos. Just old family stuff. I've been running them through the ADF on my Bizhub c454e. I've had great success with this in...
FFS. I'd cleaned the laser glass with the flippin' tool three times.
Just did it ONE more time and kind of leveraged it "up" to put a little more pressure on the glass (in case it was stuck) and...
Image didn't attach to OP for some reason.
Abuse - Let's call it neglect. Non-consumable parts are in great shape, it just had all consumable life notifications off. Drums were just run without...
Hi all,
I replaced a lot of worn parts on a high milage c454e I own for small business use.
Due to age and CLEAR physical damage, I have replaced thus far already:
CMYK Drums
Image...
Revisiting this as I am preparing to do this upgrade finally. (There were a lot of back to back important runs I needed the machine available for, so couldn't risk an issue.)
A)
I have read a few...
I'm sorry to hear about that, Synthohol.
Wellp, I figured I'd contribute to see if someone else who might have a copy of any modern firmware like GDT-M1 is more likely to lend a hand.
Great...
Oh, I fully acknowledge that there are sleep issues with the series. I've read that all over the forums, where individuals indicated that the newest firmware helped ... and others reporting no...
Thanks for that, but I want to keep it in 1W power consumption when idle due to need to minimize power footprint of the machine.
Is there a file repository for the firmware? I hate to bother...
I have a BizHub c545e and the firmware is older. I hear that the SLEEP and POWER settings on the most recent firmware sometimes behave better, so I'd like to upgrade.
If anyone has updated firmware...
Hi all.
I've been looking for a SD-511 Kit to install into my FS-534 finisher attached to my BizHub c454e with no luck. While it looks like I can buy a FS-534-SD finisher in many places, I cannot...
I posted a response some time ago, but it didn't appear for some reason.
Evidently the error message was UNRELATED to the bypass tray paper size. While trying to get the machine to accept the 4x6...
Along the same lines:
"Insanity is a gradual process, don’t rush it." Ford Prefect to Arthur Dent, Fit the Thirteenth of The Tertiary Phase(The Hitchhiker’s Guide to the Galaxy)
Hey all,
I recently bought a nice Bizhub c454e and would like to be able to do tri-fold brochures and some small bi-fold booklets. I have a FS-534 with PK-520 installed.
Shipping on a...
Hi all,
Short background on me> sysadmin, webadmin, hacker, car-fixer, HVAC tech, 3-D printer nerd.
Trying (in vain...) to print to 4x6 postcards from a 4x6 postcard file.
I have...