Currently my V180 is setup to "Save in:/ -smb://100.100.100.102:139/V180_Scans/"
My 252 scans to a folder in Fiery Remote Scan mailbox guest.
Can anyone help me change the destination, so I can...
Type: Posts; User: ManassasRalph
Currently my V180 is setup to "Save in:/ -smb://100.100.100.102:139/V180_Scans/"
My 252 scans to a folder in Fiery Remote Scan mailbox guest.
Can anyone help me change the destination, so I can...
After this machine was moved, this error came up.
Moved carriage to half position, turned on machine, carriage doesn't move.
Replaced carriage motor, carriage still doesn't move.
Where...
Mystery Solved!
Once I received Service Manual + RAP 078-251 from Adrian Stoicescu (stoadis@gmail.com) started looking at the Tray Shift Screw.
The bearing for the Shift Screw had moved out of...
V180 dual tray OHCF. Tray 6 reports as "broken". Error on display is 078-251. Can these two be related?
Any help appreciated,
Machine bought at auction. Installed and running at new location. Need local tech to check software and machine to optimize performance at new location. Go over any tips, on this new machine with...
Can anyone tell me if there is a difference between the Riso HC5500 and the Riso 9050 ink? Not the machine, just the inks.
I just installed a Riso ComColor 9050 with a IS900C RIP. The install didn't have any errors.
When I send a job, the RIP reports getting the job, but there are no pages to the job. I have tried...
I have been using two Riso (RZ990 and MZ990) for a few months.
Both machines are inconsistent with master ejecting, imaging and master feeding. I have replaced the master removal belts (rubber...
OK, the problem is solved (but I don't know why).
1) Yes, I pressed the drum release button, and Yes the second drum did release.
2) Yes, I reset the machine, this didn't solve it.
3) No, no...
A used (new to us) print cylinder came in from Ebay.
Nobody noticed that there was no ink tube in the cylinder and put it in the machine.
Now I can't remove the cylinder. Error message tells...
Xerox Docucolor 252 has developed a light bar/uneven color across the lead edge of the sheet. The light color shows on each color when individual colors are printed.
Any help is appreciated.
...
I am working on a Xerox Docucolor 12 that consistently develops excess toner on the upper fuser roller. I talked with another tech who told me whenever he services Doc 12's fuser, he always replaces...
Sidnigi, YOU DA MAN!!
Those settings worked (I've been stumped on this one for a while).
ManassasRalph
Doc 12 UI displays; line 1 "Ready to Copy"; line 2 Turn the power to the Printer ON".
Power is on; functions fine from the glass; XP12 rip doesn't communicate with Doc 12.
XP12 rip message...
Hope this helps.