Yes hvt develop Adjust = 0
Type: Posts; User: zawmyo201210
Yes hvt develop Adjust = 0
I need your help today. My machine is canon 3045.
<<<< The problem is that when copying Even when printing (shocked), black and then white are causing inconvenience. >>>>
So I did the drums...
You can check blak developer unit pounder. If the magnetic powder is low, this symptom also appears.
I have solved the problem now.
Anyway, the right side cover sensor system is always off. I opened the right side cover and there was no response. It just shows the ready position.
So I...
I have made sure to clean up all of this part of the puzzle.
I am trying.
Jam type (STNRY)
Sensor no (PS14)/PS9
All sensors along the paper path are good. I've tried it.
I need your suggestion help now.
Canon IR 4570 copier showing paper jam in output stage but no paper in jammed area What is the problem?
I have checked everything. But if I power off the...
((( I am change new Flat cable. It's okay. )))
Another problem is that when the machine has a paper jam, the error system does not go away. I power off the device and turn it back on and it's...
Yes, I am change Dc to Mn board flat cable . But I am same error.
I have a 4570 copier that I have been sitting idle.
When using it again, it shows error codes E-00732/733 when power is turned on. I cleaned the DC controllers in my machine. I also cleaned the...
I understand what you are saying. The current bug has also been uploaded with a file.
I have always corrected this kind of incident. Some of the things that don't look like a picture will be okay...
My printer Konica 226 is producing poor quality images, so I have ordered a new Developer powder(DV116) and a new drum.
In the same way, the quality is not as good as before. Bad type of pounder...
Yes. I am trying System Factory reset.
thank you I found the error from the tutorial post It was good to change the ((HVT)).
I don't know for sure. But can this error be fixed in the code?
My machine ir 3245 canon copier from Mail Box is not used.
Why? I can't enter anything like a lock on the key pattern.
If anyone knows, please help.
What happened to my copier 4570 today was that the paper started pulling and cutting.
When I removed the paper and closed the side door again, the copier side door switch button popped up and...
I am using UEFR TCP/IP network driver. I have no copier firmware.
I ma trying connection port.
I turn on the machine and start printing, but it says wait for a while and stops doing any other work. Then the error code E00315 is displayed immediately.
So what I can do is put all the circuit...
Thank you Bro. I am change Scanner unit card. I am done
Canon Ir 3245 copier from power open E0732-0001 error code. Please solution. I am change duplicate unit and Tray 3 , Tray socket removes. But it not fix.
Please help me what to do next.
I made an appointment and it didn't work out. There is no extra MFPB board.
Thanks, I'll try and do it
When I try to turn on Konica, it stops at the logo. I tried MFPB board from dismounting the Rom and NVRAM.
The machine recovered. Print test. If you copy it, it becomes a problem. I also changed...