Search:

I am 75% sure they will. I have never used a 1060, but I'm pretty sure the 1060 and 2060/70 are very similar.

I have parts for an envelope fuser that I pulled apart. Do you have anything specific that I could send you or possibly help with?

Dang customers anyway... Well for future instances if someone googles this error later on here are a few things I did that resolved without replacing the clutch:

1) Pulled apart the exit area,...

Hey Blackcat, did you ever get it fixed? Did it end up being the gear slipping?

Thank you!

Ok! I think I have solved the issue for real!! It turns out that when there is any tray that is empty in the PFU it codes out when trying to run color calibrations in the IQ-501. I've been able to...

Ok, here is what happened (I think). I replaced the board and after doing an I/O check it seemed like nothing changed. I took all connectors out and reconnected them all again and did another I/O...

Hey everyone, I got error C-4850, swapped the OACB board, HDD's and updated firmware. Whenever I send a job to the printer it spools, then asks me to "press start to restart". I press it and it...

Perfect thank you, I JUST had this issue on my c3080 yesterday and I'm leaning towards the HDD's. It seems to accept the job, but when starting to print it throws a C-4850 code. I've tried a few...

Did you end up using the KM brand HDD's, or just any HDD that is 1TB?

Thank you!

I am going to try and manually format another drive tomorrow to see if that works.

thank you for the advice. I really appreciate all you guys, this whole ordeal has become way more work than it...

I forgot about that reply - I will try that first thing. They all have the bizhub security, I will try a data reset and see if that makes a difference. Thank you for the reply!

This doesn’t work either, my problem isn’t replacing the HDD or installing the firmware. It is something in the process of unlocking - then reformatting. After going through the manual the only thing...

What specifically would I be looking for? The only thing that is odd is that even when the machine has or does not have HDD, the machine won't let me change the value to installed or not installed.
...

Firmware is up to date, but the problem is not being able to do a logical or physical format. The physical is stuck at 100% after 5+ hours. Even after the firmware update, there is no change.
...

Good afternoon everyone! I finally have the printers in hand and have begun the process of repair, but I've run into a snag that maybe someone on here has seen before. When I try to format the HDD...

Happy Monday! I think I have it fixed and figured out. It turned out to be one of the white slips that keeps the bearings from sliding up and down had a small crack which made it slide (obviously...)...

I just had it throw a cyan code, (C-4661) but I also noticed that one side isn't as tight as the other side. I ALSO noticed that the belt itself says c7000 series on it (which should be the right...

Hey everyone! I have a new issue that just developed this week. I have just replaced my intermediate transfer belt on my C2060 and now all of my front to back registration is horrendous. Like running...

I’m sorry for the delay everyone! I’ve purchased the hard drives and decided to wait on the wiring and brackets. If my 2 will still print and copy I’m not worried about the HDDs. It sounds like I...

Thank you both for the replies! I found this on Amazon, I'm thinking this is the way to go. It says "notebook" like you said, but take a look.

320gb drive --> HERE

Do I need to do anything with...

Good afternoon! I am new to the website, but I wanted to reach out and pick some brains. I primarily work on KM production units but I have 4x c754e's coming my way free of charge. My plan is to turn...