canon c910, V900 , V1000 will do what you want
Type: Posts; User: Afronixs
canon c910, V900 , V1000 will do what you want
When i had similar Issue Flagging (29-5001, 29-6001, 29-7001) after swapping with another patch sensor from a working machine , and it patch sensor is working on another machine
then ,I desire to...
Enter the service mode - , the click on JAM to know the exact location of the sensor (PS) where the obstruct is.
hi,
if the toner bottle is empty, there are still some toner content in the hopper unit, which can still do some printing.
and if you continue to print the machine might flag a code relative to...
Replace the drum completely , or the OPC and the cleaning blade
Hi
though it an aged posted, but someone check the machine interlock in front of drums cover to your right side
Hi,
check the following
1.your toner ( if not fusing to paper well)
2. the drums YMCK
3.the transfer belt with its cleaner
also you can share the image with us
Hi
service the transfer belt assembly and the patch sensors
and do your test again. my Clue should be enough for you , just be careful while doing that
Hi,
first ,
copy out the following machine parameter from service mode
service mode- mode list -copier - adjust
1. laser 2. Dens 3. image adj 4. V cont 5. feed adj
6. P/Pascal in level 2
...
hi,
if you can reach out to me you can get it
Hi,
[Detail] The lower belt assembly (FM1-C722-000) with insufficient amount of grease applied to its gear may have been distributed in the field due to the poor control of the amount of...
hi,
Try to apply grease to the metal gears. probably its having dry drive
hi,
with my years of experience in production printing, printing with EFI server (fiery) makes a great difference than without fiery, it wait time and toner without the server and jobs also looses...
hi,
confirm the present firmware and then upgrade the firmware with the recent one in Canon SIMs
or share with me the present firmware version, so i can help you get the latest one
Hi,
try to replace the magenta drum and it developer accordingly.
something, the bias charge roller of the drum might be soiled with toner or bad, also the ATC (automatic toner control) sensor on...
Hi,
kindly check the following
1. is there no obstruction along the paper transport path
2. Are you entering the right paper size
3. i will appreciate if you can share the picture of the position...
Hi,
first of all, the machine is having an error code, to approach this, you need to enter the service mode , then check the error list for the code,
Also to clear the ULM, from service mode you...
yes, I do. share your issues!
kindly share some of your issues , if i can be of help.