firmware wont make any difference - if you 5 series is working fine do an export via rui after doing an init data - alternatively set up scan to folder?
Type: Posts; User: alex@wocltd.com
firmware wont make any difference - if you 5 series is working fine do an export via rui after doing an init data - alternatively set up scan to folder?
dont use airprint its about as bad as wsd - download correct package from canon and install normal via lpd and ip address
dump the main controller
connect laptop with crossover cable and send a variety of files to print over a prescribed time ie if the client says it happens every hour or so test for say 3 hours to see if you can replicate,...
firmware update wont resolve print hang issue - have you tried soak test with laptop and crossover cable?
would assume exfat......
this normally means someone has gone backwards with the firmware - which means the main controller is bricked......
youve bricked the main controller - only solution is new controlller
absolutely shouldn't be able to - what brand/make was the 'random' drive?
however thanks me later - Toshiba MQ01ABF032 AAF AA00/AM001K 320Gb 2.5" Laptop SATA Hard Drive D1 | eBay
either someone plating around with the eco or counter boards or swapped a main controller with donor machine counter board still on it
have you tried the option to print pdf as 'image' - this solves most problems with weird pdf files
you need uniflow......then you can
main controller has popped
nearly 99% itll be the main controller - do you have 3 green leds on it? if any flas anthing other green its toast
When I try booting printer while holding 2+8 with the firmware loaded on the USB drive using SST it simply shows: Wait for USB/SST Connect Menu
Checking USB
Waiting SST connection
try another...
press the secret buttons - and it will show you service mode
hi,
looking for main controllers for 55xx and 35xx either end of life or known working scrap - lemme know what you got,thanks
Hi people, 52
getting alot more main controller failures on 35xx and 55xx .....seemingly since the majority of companies have now gone back to work.......ironically can say 50xx/52xx NEVER...
you have to go via rui then bottom left login to console and switch the service from user id to dept id and then restart machine(s) - this is for ALL newer models after 52xx
hi people , does anyone know the secret part no. for the 'complete assembly itb' for the 5760 ? typically listing it as NPN , but have in the past been able to get the 'correct' 'secret' number for...
have you tried wlan?
they are antiques - will have beeen used to enable features on machine
wont work - hdd on this range are paired to individual machine so not swappable
you cant just pull hdd from the later machines(like you could on the earlier ones) - for each machine you will need to format and install s/s........
Thanks buddy!....assume canon hq has a secret part no.,but fanks anyway