I had this problem and it was power supply.
Type: Posts; User: elmaligno
I had this problem and it was power supply.
. C5372 (CPU temperature failure) may occur during PC printing or low power/sleep mode.
As a countermeasure, the FAN will not turn off even in low power mode or sleep mode after applying this...
I agree, this happens a lot of times, you have to bend the locking pin down a little bit.
I-option_AA2J0Y0-B200-G00-01_PDFAFontData.exe
PDF/A scan function is standardized in the firmware G00-E9 and later versions.
Therefore, PDF/A function that was provided by LK-102 will be enabled once the firmware is installed. If PDF/A Font...
Maybe if the photo was in english.....
at the moment it is not published, it must be like everything in these models, they sell things that have not been manufactured yet.
Yellow is missing. Start there and then reset + stabilizer.
The main thing is that it is the same as for the new range finished in -1 and that will be launched on the market now, so there will be no need to go with two different firmwares for each model.
I...
Maybe fixing SWITCH 10 x02. This converts any second brand machine into KonicaMinolta, but I have not tried it.
Good afternoon, does anyone know of a link on amazon to buy an external 4-wire counter so that the customer can count the impressions? It is like those that were formerly installed attached to the...
That is right
Whenever you boot the machine with the USb with FW, you follow the "magic sequence" procedure and then load the boot rom, the fw and wait for it to request ·Recover Data". Only works if it is not...
If the STRGB is not physically damaged, you can connect it to a computer, erase the partitions and format it in FAT32, and it would be ready to work on another computer, suitable for any model of the...
219
6
A function to enable "_"(underscore) to be used for the default DNS domain name.
Disabled
Enabled
0
INC000000016668 ERBAU_1900919203
DLKM_BT1932132EN
...
bizhub 958/808/758, bizhub PRO 958
I ADJUSTMENT/SETTING > 5. SERVICE MODE I-146
(3) Setting item
• ON
• OFF
NOTE
▪ When the setting is changed, the function becomes available by turning...
this has also been the case in the first machines, due to a firmware failure, so I advise you to update the firmware if you have not already done so, and set the SW 25 to 30.
there are several options under admin, security, concerning the use of the display usb, you may be restricted from exporting data through it.
It is a well known problem, it could be the STRGB (most likely), or the CPU Board.
Field technicians have tools to determine which one is defective.
If you are using the PCL driver try PS, something similar happened to me.
Photo?
Good afternoon colleagues, I have not worked with production equipment so far but I need to sell and service an AccurioPrint 2100, which is based on the PRO 1100. If there is anyone who already knows...
https://we.tl/t-wEmJNHyRS0
01234567890123456789