During COVID, I was unable to find C-3110 Fusers, and was forced to use the C-25 units. All I did was break them apart and install the rollers/frame into the C-3110 case and we were good to go. They...
Type: Posts; User: Oystercopy
During COVID, I was unable to find C-3110 Fusers, and was forced to use the C-25 units. All I did was break them apart and install the rollers/frame into the C-3110 case and we were good to go. They...
Hey guys...
So, because I rebuild stuff in my shop for the KM products, I've been buying parts online from Chinese suppliers. And - as you might expect - sometimes you get a dud, but can easily...
OK, no problem. I'll have to see what other suggestions are out there...
OC
I have no idea how to do that, but open to suggestions!
OC
Hi guys.. I have no idea how to get into the service mode or to check those items. But if you give me the procedure, I can give it a shot. Also, I supplied this customer BOTH types of cartridges, but...
I (mistakenly) sold some (what I thought were, and looked like) OEM toners to this customer and about a month later, the cartridges are totally out again? I believe I took these out of OEM foil...
Agree TSB... I guess I'd want to have a machine in front of me when I do it the first time, and (obviously) not in front of a customer or on their machine! I'll probably get around to doing these...
Well, THIS was a lot more than I bargained for! Thank you to all techs/engineers for the excellent responses to this question.
It sounds like it could be a lot of work to convert the drums, so...
Hey guys,
I took this machine in shop today and its got some strange things going on. First, it will only seem to print in landscape, and reduce the image, even though I'm not changing that? (I'm...
Is anybody successfully using the cheaper toners and converting them into the i series toners?
I know you can get the chips, but have never tried converting them by using a cheaper cartridge (like...
I've been rebuilding the 4 series and 8 series (same fuser, basically) with parts from China for a while now. They seem to work good but I can't get more than 400K out of them either.
I'm also...
So, I had my first one of these throw a scanner code the other day. Had a heck of a time getting information on it from tech support, but basically, it turned out the scanner drive belt was bad.
I...
NEVERMIND!
I found it!
OC
Thanks for that... I was able to get into Diagnostics, but did not find anything that allowed me to change the contrast of the display?
Did I miss something?
OC
Hey guys.
I just traded this thing in and want to donate it to charity, but need to see if I can improve the display contrast (and maybe, sensitivity?) and also would like to erase the HDD, if...
OK, so I went out there today, cleaned the optics and both sides of the glass, cleaned the actuator sensor in the rear, checked the front magnet, and then everything started working OK.
Thanks for...
I read all the other posts on this issue on this board, but none of them seem to address the initialization of those sensors under the glass? Went looking for it in the SM as well, and could not find...
The feeder has adjustment screws on the rear (easily adjustable with all the covers on) that will lift or lower the feeder to the glass. I do it all the time. You will see that the feeder will lift...
Thankfully, no. Only a new billable customer.
OC
If I were you, I'd do an Initialization of the machine, then go back and set the Fax Kit (in SM) and then the Region to (whatever region you're in). Analog fax kits have trouble sending over VOIP...
I went away from generic toners (Katun/Toshiba were the worst) years ago and never looked back. I had a billable customer at a church and they're using generic toner and it took me a while to figure...
Put 3 new color drums in today; pretty much the same, although the machine did give me some solid colors on Magenta and yellow. Also realized that the customer was using generic toner and was not...
Yes i've gotten those too!
OC
Yes, when I removed the drums, I rotated them. Hard to tell (physically) if there is any damage.
And, yes, when I put the new belt in, I cleaned and inspected the sensors under the xfer belt.
OC
I agree Copyman... this is a first time customer of mine; never seen the machine before. Had this been a customer of mine on a monthly agreement, there would have been NO removal of parts,...