this file has been removed from the site
Type: Posts; User: MARDSO
this file has been removed from the site
Hello. it is possible to reconstruct the fuser unit, but depending on the quality of the fuser film the result is poor. in 454 with the parallel film does not set the toner well when the paper is...
good afternoon. I have a problem in a machine where it does not light the transfer crown and static elimination. has already been replaced hvt and ac hvt, corona and nothing of problem solve. Any...
I need to reset the general counter!
she needs to be with the reset counter
because of a bidding !!
Good Morning
Anyone know if it is possible to reset the counter bizhub 454e?
What's the procedure?
thanks in advance!!!
Hello guys!
I have a C452 with this density problem in yellow !! the unit that the machine is giving density 0% and another machine it is giving density 7% !! anyone ever seen this problem? I thank...
Hello! I need to revealing taskalfa cs4500i! Anyone know where I can only developer po? there to buy or only whole unit? from already thank you for your attention!
I already got problem in laser flat cable! wipe his contacts
I have an iR5075 and she does not light up the panel. she calls regular heats. after some time the panel it is with the light on but it does not appear anything. please help
I have a bizhub C452 that was showing the code p5, itc sensor! I removed the belt to clean the sensor and after doing this the machine returned with the code and not p8 leaves yellow !!! already...
Thank you! worked !!!
I have an iR7095 this appearing the code 0C00 jam! already identified that the defect is in the fuser unit !!! any tips? please help !!:(:(
the screen goes blank, it does not appear anything but the backlight stays on
hello people, I have a irc3220 this appearing an interesting problem! at the time that the machine is ready to copy when I press the start, it erases the panel and is as if warming up, but nothing...
thanks for the reply! I live in Brazil and I'm not finding these hds here! you have to sell? as is? is to send to Brazil?
I have a machine that appeared to go 5075 E602! hd is defective or lost system! I have the service tool and firmware, but do not know which model necessary to put in your hd! if anyone knows which...
thank you! I have three machines that are with this code, this one bna fusion and the other two I'm still investigating!! thanks for the help! once you have a result post here!
check the sensor PS24 whip it wont touch the housing of the machine which ultimately cutting it and causing a short circuit!
Thank you! I will await the arrival of the counter to install the new machine! the procedure is so new that he put the already inscribed in the serial counter? not have to do any more procedures?
I have a iR7095 with error 246! I get the counter of a 7105 that turned up and put in 7095? help
thanks! I will try this option!!!
I changed the panel! it turns on and begins to heat but is giving an error because it does not heat up finishes! already tested boot rom and ram! this ok!
I have a problem in the panel of the machine! it does not connect! starts the machine starts to heat up the panel does not turn on! so get the small green light does not appear nothing more connected...
was probably the tip of the connector with short circuit that solved the problem! I already got several problems due to this connector! defective hard to identify!!: Mad:
imagePASS that does not have a ta with the default password Fiery.1. how do I change the password, and do not know what password that is registered in fiery?:confused: