Thanks all
i will double check for the firmware
Type: Posts; User: Acadien
Thanks all
i will double check for the firmware
Had same issue on different model, an i am pretty sure it is cause by the rollers inside the transfer belt. i replaced the transfer belt unit
BH C450i with firmware AA2 J0Y0 F000 G00 M2
When I turned on the MFD to installed the FW after a couple minutes the dot on the screen disappeared and the machine booted normally.
Also tried to...
When Maintenance kit counter is at 0 % do you replace it or just reset counter, everything is working fine.
What is your favorite scanning setup unless ask otherwise.
would it be...
scan to email
Scan to SMB
or else?
thanks
Printing fine not missing any print document but randomly spitting out a page with "PCL XL error Warning: Illegal Media type"
any idea on this?
is it possible to disable Market place app.
I mean not only hiding the button but really disabling it
sim 63-7 is giving me a value of 255 so the ccd seem to be good
Completly black copies, only when making copies, (of the glass or Doc Feeder) print is coming out perfect.
The copy lamp is good.
No error code.
Anyone, anyone ?
the only problem I had with L4 code, on those machine, was caused by the toner cartridge.
make sure the ip of the computer you are trying to send the scann to is enter correctely. If it is entered correctely verify if it is not block by a firewall.
Right on man...
You were not guessing ... you knew exactly what you were talking about hein
Thank you very much sir.
problem fix
Document Feeder MX-EFX1 on a Sharp MX-M450N
When I try to make a copy using the ADF, there is absolutely no noise coming from the ADF and a window appear on the display “continues Printing...
fuser should be rebuilt at 100 000 and replaced at 200 000
Thanks for the reply ... the upper left corner of the auger unit has to go underneath a little groove in the rear frame of the copier and I was missing that all along.
Yes it is genuine toner.
I...
e studio 451
The auger (part #6LA40607000) that bring the black toner from the toner hopper to the Dev unit, broke.
The first time I replaced it it lasted for about 6 months, the second time it...