Reset soo many times.
Even checked pcb.
Checked lamp thermistor fuse everything..
But still same problem.. 😐😕
Type: Posts; User: hassan123
Reset soo many times.
Even checked pcb.
Checked lamp thermistor fuse everything..
But still same problem.. 😐😕
When i was open the front door i checked aftar reset the error code c3503..
Heater lamp is on continously..
Even machine in ready position.
Look like thermistor not work.. but same heater work on...
Hello everyone..
I have bizhub 751.
Show error c3503..
Normally this error remove after resting or found something wrong in heater section.
But i changed complete heater section even checked same...
hello Everybody........
Dear users I am using Toshiba 306se.
Today i face error in my machine which is F121.
i search this error code and found User abnormality (user Information management...
Thank you Very Much Dear..
Machine is Working Now....
Hello Every One...
Dear I have a problem in Toshiba E studio 2006.
Machine Show error code c452.
plz have any idea how to reset this code????
Thanks for Quick reply.
Hello Every body.
I have a problem with Lanier ld118d.
When machine in a running mode it jam a paper.
I removed the paper but machine still show paper jam.
Machine show Open lower right cover...
Yes Dude i Done all the adjustment and reset the counter after install new drum and developer.
The image is light on the drum as well. I change transfer charger check voltage in adjustment mode...
Hello Every One.
I am facing Light copy problem in konica minolta 7272.
I replaced drum , Developer.
Check Voltage but problem still.
Toner supply Motor Working normaly.
When a feed...
Hello every one.
I am facing a problem in Canon Ir 2016.
Machine show Toner is low Add New Toner Even Toner Cartridge is full.
It is having any program to solve the issue???
Or a...
If you are are a good technician. then tell me solution.
words is not important work is more important.
soo keep focus on your work.
this forum is basically made for help the family members of...
Friend i need solution.
Manual is costly because i have only one machine.
My friend what is P.U.1????
Hello Friends
Facing problem with old Minolta 5000.
After a single copy made machine show please wait message.
Then show error COE00 which is MAIN ERASE PROBLEM.
Replace ERASE LAMP and MAIN...
CLOSE FRONT COVER
Mostly the problem of power supply.
check the power supply.
HELLO FRIEND
my email addres is shah_naseem4u@yahoo.com
please send manual i am waiting.
thanks again dude
Hello Every Body
The Old minolta 5000 create a problem for me.
After a single copy made. machine goes to please wait.
when i restart the machine the status is similar.
Toner tank full with...
Hello every body
i am facing a problem with konica 7155.
I replace drum developer blade.
After 1 month copy is light.
I check and find out the toner droping problem.
Toner is not drop in...
hello
08-692 for panel callibration.