Those codes are for different things, a 29-07 is relating to the gamma sensor (ps-11) and 29-13 is the drum potential sensor for cyan.
Type: Posts; User: superfly
Those codes are for different things, a 29-07 is relating to the gamma sensor (ps-11) and 29-13 is the drum potential sensor for cyan.
I think i agree with maxtrax, install ftp services on your server and setup scanning via ftp. i have lots of problems with smb scanning
Hi Gary, The copier is probably set up so that you have to enter a code to print to it. you do that in the print driver screen.
ugh, win 2003- i tried to set up same thing on a kyocera and i ould not get it going either. from what i was told by our network guy is that 2003 has a lot of security stuff that likes to block the...
lol... yea, there are also two clutches in the duplax path that are loaded with grease! fun-fun!
I thought i would share this with you guys-
If you ever run into one that constantly says 'warming up' and never comes ready or throws a code, the fuser connector in the back of the machine is...
Hello! I used to work on these old analogs years ago, i have one that i believe needs the clutch in the duplex/tray 2 and 3 feed assembly. getting z fold jams by the transfer area. anyone have a...
OK, Thanks!!
Hello everyone!
I have a customer who needs their Auditron turned off. Is there a way to reset it if they do not have the system password? They have a hand-me-down and i'm sure they do not know...
I agree with Colormethis, Usually that will fix it for a while but the machine probably needs a pm and all drums and developer. i usually see that code when the developer is getting old. remember...
TAUS0701149EN*
Solution ID Solution Usage
Description
Dirty copies....
Sounds to me like you're not getting 24V to the doc feeder; or the board that controls it is dead.
A printer is just 1/3 of a copier! :p SO NAAAAHH!!!
I can't remember for sure, but i think there is a one way bearing on that shaft. i would try cleaning those as well. if the shaft isn't turning, then you must be losing drive somewhere. Also, i have...
What problem are you having with it?
I suggest replacing the whole trans/sep unit, or maybe replacing the pm kit, which has the drum cleaning roller, blade, web, filters, and all wires. i usually start noticing that around 300K and a...