Need SD image file for XEROX 7845/55
Thanks in advance for any assistance
my email: contact@compax.ch
Type: Posts; User: mkarip
Need SD image file for XEROX 7845/55
Thanks in advance for any assistance
my email: contact@compax.ch
Thank you for reply mike
Thank you for reply.
Is it possible to take HDD from a C355i?
I can't select a firmware because I don't have a working USB Flash Drive.
Get to the screen below, no further.
50191
I have replaced the hard drive, now I have to load system software via USB Device.
Need Firmware and instruction..Button 2+8 then Download..right?
That would be the easiest way, but the hard drive is defective, the device cannot complete boot.
No acces to service mode.
Hello Phil
I cannot send PM messages.
Can you contact me?
I need the firmware for an C3330i.
Plus instruction which data is necessaray on USB Flash Drive
Error on bootup: E602-0101
Thank you very much.
info@compax.ch
Problem solved: It was the lower scanner unit.
have a problem with C5550i.
Scan & Copy display a yellow 3 cm bar.
B / W copying and scanning OK.
Internal color printouts and printouts from the PC are okay.
ITB drum as good as new.
Seems to...
yes
Dear Friends
Got a problem with C5550i
A yellow 3cm bar appears on Scan & Copy.
B / W copy & scan OK.
Internal color printouts and prints from PC are all OK.
Drum ITB as good as new.
Seems...
Please i need for 75xx 78xx Series info@compax.ch thanks
Dear friends
Is it possible to use irc4580 toner for the adv5030
Are there any problems after that with drums developer etc.?
Thanks for your answers
Dear Friends, we have following Problem
Copier: C280
Internal Prints: OK
Copy & Scan from glass & ADF both skewed see picture
exchanged whole scanunit with a working one, same issue
Thanks...
Thanks for your Suggestion
That would be too easy :o
But I will clean the removed M laser nevertheless,
publish result in a few days.
Thanks again
Hello community
Magenta becoming in the last weeks weaker and weaker, now missing totally.
Magenta Drum works perfectly in another machine.
Grateful for any help
Thank you teckat for this reminder..:)
Problem solved..Black Laser was the Problem.
Thank you all for your support
Dear Canon.Tech
Its definetly not a drum problem, because i have change it with several black drums in good condition. Color of Thin Lines is only black, no other colors. Lines occurs with prints +...
22190
Thanks for reply Canuck
I will try your solutions
The maschine is at clients office, can response with hopefully good news next tuesday.
lines occurs on both copy&prints, black or color no difference..only P-Print is always clean.
Thanks for Response Canon.Tech
the v marks are from me to see better the thin lines..TransferBelt replaced earlier..no luck
sometimes all good next time maybe 30 thin lines all over the prints....