Search:

Type: Posts; User: Detonation

Page 1 of 14 1 2 3 4

Search: Search took 0.00 seconds.

  1. [Misc] Re: Xerox Phaser 7800 Green screen and reboot

    You can reload the contents to the SD card with a disk image application. I have the SD image available.
  2. Replies
    6
    Views
    536

    Re: Altalink C8055 drums

    I am assuming that would be because copies are multiplying your color imbalances. So if your print has slightly too much cyan (something hardly noticeable), and you make a copy, that copy will have...
  3. Re: AltaLink C8130 refusing to altboot or software upgrade

    The original SSD in the machine was 128 GB. I tried replacing with a SSD of 120 GB, no luck. Now I have tried a 250 GB HDD, and the machine does (special) Altboot. Maybe early versions of the machine...
  4. Re: AltaLink C8130 refusing to altboot or software upgrade

    I tried special Altboot with version 119.009.023.13000. As I cannot perform PWS altboot, I am hesitant to format HDD. If it doesn't work, I am stuck without a working machine.
  5. AltaLink C8130 refusing to altboot or software upgrade

    I have a AltaLink C8130 running 114 software which is running fine, but refusing any sort of software upgrade or Altboot.


    USB port are enabled
    software upgrade is set to allowed
    I was able...
  6. Replies
    6
    Views
    536

    Re: Altalink C8055 drums

    I have only seen the purple drums over here in Europe. I do remember the 7345 drums used to be blue, and the 7435 drums were green (as were the DocuColor 252 drums), but the newer batches of those...
  7. Re: Is the Primelink B & W series toner same as Versants

    Thanks for sharing that, good info!
  8. Re: Xerox J75, C75 or 770: how many printed pages for such devices is ok?

    I would second that, have seen some good machine with 4 million clicks. That being said, make sure the service log is with the machine. Replacing parts is expensive. If just the finisher is the...
  9. Replies
    1
    Views
    262

    Re: AltaLinkC8170 362-453 CIS CCD error

    Performing forced Altboot won't hurt, but I don't think it will solve your problem.
  10. Re: ITB Home Position sensor and ITB belt (7232)

    As far as I know there is no way to adjust the belt on the 7232.

    It is pretty common for the sensor to become dirty, as it is, inconveniently enough, located under the belt.
  11. Re: ITB Home Position sensor and ITB belt (7232)

    There is a reflective patch (square shiny sticker) on the belt that passes a sensor. When the patch is damaged or the sensor is dirty, you will get this error. Since the patch is on the outside of...
  12. Replies
    5
    Views
    1,170

    Re: Altalink C8055 black/white only

    Interesting, this is not a setting I have ever heard of before. Subscribed.
  13. Re: WC 7435 display too dim and how to erase the HDD...

    You can login to diagnostics by holding the 0 key for 7 seconds, and while holding it, pressing the start key. You can then login as service admin with 6789.

    If you go to tools => diagnostics, you...
  14. Replies
    15
    Views
    2,258

    [Jamming] Re: Erros 075-100 / 075-109 / 075-135

    Have your tried the Bypass chute assembly? Also, by pre register, do you mean pre-registration sensor, or pre-registration motor?
  15. Replies
    106
    Views
    15,540

    Re: Altalink 80XX Series special Altboot method

    Appreciated! I do have plenty of C8030-C8035 to use as a source though, it's just that it hasn't worked up to now. I'll retry when I have time.
  16. Replies
    1
    Views
    305

    Re: xerox workcentre 7970

    There is no setting I am aware of the would enhance gloss. You could, at your own risk, set the paper weight to something heavier than it actually is. This will slow down printer speed, up the fuser...
  17. Replies
    106
    Views
    15,540

    Re: Altalink 80XX Series special Altboot method

    C8030. But I’ll try again some day.


    Sent from my iPhone using Tapatalk
  18. Replies
    106
    Views
    15,540

    Re: Altalink 80XX Series special Altboot method

    Thanks for sharing that diagram! Now, as for restoring a corrupt SD, I have personally not been able just yet to clone a SD from another AltaLink.


    Sent from my iPhone using Tapatalk
  19. Replies
    5
    Views
    671

    [Error Code] Re: c60 error 010-321

    Also check drawer connection for bent pins and/or pieces of paper or debris
  20. Replies
    106
    Views
    15,540

    Re: Altalink 80XX Series special Altboot method

    I've also seen these machine can be picky about the USB stick. Try a different USB stick as well, newly formatted FAT32. You can even try 2 USB sticks, 1 on the front and 1 in the back.
  21. Replies
    106
    Views
    15,540

    Re: Altalink 80XX Series special Altboot method

    PM sent.
  22. Replies
    106
    Views
    15,540

    Re: Altalink 80XX Series special Altboot method

    Well, there is even 'software_upgrade' in the file name. The altboot files have 'ALTBOOT' in the file name. The 119.xxx ALTBOOT files are 632MBs in size.
  23. Replies
    3
    Views
    623

    Re: Xerox Fiery Impose issues

    Yes likker Gaffers01 said, Impose is not a standard option, but you need to purchase a license.

    On the 700 Fiery: is Acrobat in fact installed? If not, you'll need to reinstall. Do you have the...
  24. Re: Is the Primelink B & W series toner same as Versants

    I would guess the toner powder itself is the same as the 4110/4112 and D95/D110/D136, but am not 100% sure. Obviously, the cartridges and chips are different.
  25. Replies
    106
    Views
    15,540

    Re: Altalink 80XX Series special Altboot method

    This link is for the upgrade, not for the full altboot.
Results 1 to 25 of 332
Page 1 of 14 1 2 3 4