There is switch off and hold, power save - stop - 6 while switching back on.
But sometimes removing the ram dumps unwanted bugs.
Type: Posts; User: Eagle
There is switch off and hold, power save - stop - 6 while switching back on.
But sometimes removing the ram dumps unwanted bugs.
I had similar problem but my screen would go black.
Believe it or not, ended up swapping over the power supply and fix it.
Yea as above bk dev unit and I would be looking at the bk btr roller inside the ibt belt. As there are bk vibration roller maker in the yellow and mag in the image you posted.
switch off unplug from the wall, pull out the ethernet cable, then pull out all the ram after all the ram is out put them back in. Switch machine back on and make sure you leave the Ethernet cable...
All you need to do to clean the laser if you get the problem again is to remove tray 1 & 2, slide out the drum, ibt and transport draws lay on your back and reach your hand up into the machine and...
FTP scanning is a complete different story.
Update software on the xerox will not enable all the correct sharing protocols on w10 including smb. Smb is switched off on w10 with new updates. If your running old version of w10 Smb will be...
If your not a tech Don't Factory reset any printer.
There are a lot of settings that will be cleaned and without in putting all the correct setting for your particular machine you will have a lot...
Every screw must be tight. And make sure the ibt cleaner assy in clipped in correctly and the rear before inserting in machine.
I would just walk away or charge the customer like a Raging Bull for doing that.
Your correct.
I fixed that problem but cant remember what i did. Try initialising the IOT
???
Sorry to say but that's what uninformed IT guys would say and are saying when it comes to scan to pc on a windows 10 with the latest updates.
Windows 10 updates turn off SMB 2 and change...
Sound like region problem.
For example I'm in Australia if i buy a toner or drum form the USA i would get the same problem your getting and vice versa.
Different chips thats why..
Problem definitely in IBT unit. As its affecting all colours and smearing image.
The image is getting smeared off before the fuser. That is why its has more solid colour at the leading edge and is...
Common Problem.
Replace IH Driver PWB = Number "4" in Diagram
46094
Are you a tech?
Do you have a Xerox Test Chart?
You have a Transfer problem. Image not transferring on to paper
# Open fresh ream of paper and try.
# check, replaced transfer roll or assy
P.s if there is a problem with the registration assy...
I had a good look yesterday and there was no sign of paper decks in the manual I have maybe I dont have the full version, im after the PF-70
I though like the Canon manuals they have accessories...
Thanks mate, Sorry I should of been more clear. I have the service and parts manual but the paper deck is not listed In them because there optional. "So im looking for the paper deck manual."
#...
Hi I am after the paper deck rollers for a KM-3035 - could you please let me know the part numbers & a parts catalog
Hi there
i have a Oce plotewave 300 that was working fine and tested at the customers before we moved it, After relocating it and switching it on the first print jammed and the print had a solid...
E613 Failure in memory (main controller PCB 2)
1024 Capacity shortage of DDR2-SDRAM (M0, M1) (1GB required)
1536 Capacity shortage of DDR2-SDRAM (M0, M1) (1.5GB required)
Sorry for the small...
E613 1536 00 Title Faulty/insufficient image memory (Main Controller PCB2)
Description No necessary memory at Main Controller PCB 2
Remedy Make the Memory capacity at Main Controller PCB 2 as...
P.s if i open all doors on machine and switch on the error code 5102 still pops ups....
Hi there
i have a Oce plotewave 300 that was working fine and tested at the customers before we moved it, After relocating it and switching it on the first print jammed and the print had a solid...