thank you very much sir for the help, the machine is already okie electrical problem they use extension although when i test it with the multitester its same 210volts when the machine runs it drops...
Type: Posts; User: remielee
thank you very much sir for the help, the machine is already okie electrical problem they use extension although when i test it with the multitester its same 210volts when the machine runs it drops...
hello guys, can i ask for some advice about my problem of toshiba 600 error code c443 i try to reset in the service mode, 08-400 the value is 3 sometimes 6 and make it 0 then enter or interrupt. i...
hello sir i have knowledge in toshiba and konica minolta and im willing to applied on your post job. how can i contact you?
hello sir, can i ask some help? i have a machine canon irc 3580i and i try to configure the scangear but i dont have any luck, i installed the network scangear driver then i used the smb for send...
im sorry sir i already change it and the broken feeding unit was already given to the warehouse i cannot be able to take i back again. thnks for the reply sir.
i know sir that this machine was an old models of digital machine for a canon. i said on my previous post that was slightly new because i base only on its meter count or meter reading, i know that...
thnks for the reply sir, i will try your advice tommorow i hope it will work, just another question again sir, i remember somthing, before, i try to remove the tray and manually press the switch on...
hello guys, can you help me and ask some advice about my problem of canon ir 6000 the tray 1 was not lifting or working, this machine is slight new only 1000 copies it made, maybe before theres a...
sir can i have also the firmware for ir 2230? my machine got a message of download standby...thank you in advance..
hello guys..i have a machine canon ir clc 3200 that need to setup on the network or work a a printer using lan cable...this is my first time to setup a connection of this kind of model.. now i notice...
hello guys can i ask some help? i have a machine ricoh ft 4527 i need to deactivate the sorter and not used it anymore, so i removed the sorter and on the machine but when the machine started to warm...
thnk you guys for all your advice and help i really appreciated, the machine is already working fine, i try again to calibrate the developer using 05/200 and manually adjust the percentage about...
sir can you help me about my problem of this machine.. charging toner and the toner indication is alwys blinking, i check the toner bottle and it still have not empty.. i check and clean the...
hello guys can you help me about my problem of the toshiba estudio 452 having a light copies. I already replace the developer and make calibration using 05 200 and the value 2.35% it works only a few...
thnk you for the reply sir, i will do your advice and idea. thnks a lot i will reply again if its work ..... happy new year. thnks to all! godbless!!
yah thats right but if im going to make simulation to drop the toner it works so it means there are no problems of the motor because its droping if im going to run the program for droping toner. so...
my machine is light copy i check the optics unit clean all the mirros, i also check the toner and its full, but if i manually put some toner at the developing unit the copy become good what do you...
try to run the hdd reset, off the machine press/hold 08 then pres 690 then pres start button the default value is 2 then press enter, when the copier indicate to reboot the machine turn off then wait...
guys thnks for the replies on my problem, i already fix the network conectivity for mac os, i simply ask and search google then i find the steps now the machine and connection are working fine. thnks...
Did you try to clean the mirros, remove the platen glass and clean all the mirros and the small rectangular glass beside the platen which the paper pass from adf and also the exposure lamp, hope it...
Sir can i have too, for usb firmware thnks for the advance nd godbless...
hello guys! can you help me about my problem of my machine ricoh aficio 400, theres a dark background on the copy i try to adjust the charging grid and the developer bias but theres no change still...
thnk you sir about the reply.wat do you mean that i will insert the flash drive into the machine in tha right side of the machine then i will go to the admin mode then setup network after that...
guys can you help me of my problem about the network setup of toshiba estudio 452, how can i setup the network on the mac os do you know the steps? please sir send me the steps, i already have the...
thanks to sir mojorolla the first one that reply on my thread giving ideas and advice, to sir zootech for the additional advice to know exactly the history of the codes and the subcodes, and to sir...