Is it possible to order somewhere C3300i,C3050i OPC drum only and a charging roller?
Have anyone who order this parts?
Somethines the toner scratched the OPC drum and or the charging rubber roller...
Type: Posts; User: Sysco
Is it possible to order somewhere C3300i,C3050i OPC drum only and a charging roller?
Have anyone who order this parts?
Somethines the toner scratched the OPC drum and or the charging rubber roller...
Change the drum, corona, develop house, and see the result.
It's not too much time.
I like it. :cool:
194K whooo nice number.
Use a duck tape to hide the counter button on the screen.
Stupid user request make stupid resort.
+1 the least you can lost all the counter data, so you can win new machine and begin from 0 the counter.
" the mgenta drum unit because it reached life twice. "
How many count was in the mg drum unit?
I never see much more in the 313 drum unit then 120k never in the china and the malay version too....
I have same problem earlier, and I don't know the right answer.
I changed the toner to another and it's gone.
I think the KM and Develop toner made in same place just only the chip is
different....
Sry.
The jam code is 11-02.
The strange is when power on the first page (config page) is ok, but if you want to print another
config page it's jam with the above code.
I have a strange error.
When print -for example the konfig page - on C3300i the page jam in front of the
transfer belt unit.
If I make a paper passage test it will be fine everything and all...
It's a fault blade.
Someone in the cleaning section.
Try to remove the blade and checked the blade.
Mellesleg ha ki akarod próbálni szórj rá kis sárga tonert a ITB-re és tekerd át, könnyebben...
Not need to delete, same on my 4020 machines.
It's possible to disable in the shortcut menu.
Yes, it was an old problem on the C220 series.
Noise when turning the waste toner box gear, but it can't move the stuck in toner pipe from the ITB to WTB.
In the C220 pull out the ITB, and you can...
Ok, I tryed the other (2GB) USB stick, and same result.
The C3300i can't boot, freeze in the start logo.
The other USB stick is also working in other C3300i machine.
I will try today, but the other USB stick worked in other machines I think not is this the problem.
Attached the photo.
I checked the diagnostic tool in the machine.
Nothing change.
It's freeze and not going to diagnostic menu.
I waited 5 minutes.
I checked the USB in other machine and it's work perfectly.
I...
And how can I checked it?
I will check this today.
It's the G2-E9 fw version.
I have a C3300i which freeze in boot (KM logo) the line is 1/3 on total.
This machines worked with perfect to friday.
From friday it stucked to boot.
I think it's an SD Card error.
Can I boot it...
Update FW.
It is a KM branded Memjet machines. :cool:
Same issue in my field machines with C3300i.
Print halftone pattern and if it is ok update fw.
The only help, if you can't see the first error messages when drop the machine which is 2555 or 2553...
I have a print head error message on the PKG-675i.
Somebody know what does it mean, and how cancel?
49286