These thumbnails are to small post to an online image hosting service.
Type: Posts; User: allan
These thumbnails are to small post to an online image hosting service.
Please post a sample printout or scan please.
You need to print out the gradation test prints from service mode called half-tones. Are you a technician?
Sure the truth will come out soon enough.
Anyone know more about this? What does this mean for dealerships?
Fujifilm, Konica Minolta eye joint procurement of office printer parts -
Nikkei Asia
I would suggest to not let it do firmware with the finisher attached. It could work like the FS534 working instead of the FS536 on the 8 series but
will not work after a firmware update due to the...
You need to setup user authentication for all the individual users regardless of the department. Then setup account track for the departments.
The user will first need authenticate by entering...
You have got me curious. What are you trying to do? The devtank will discard excess developer through the waste port. I would guess about a teaspoon full per bottle.
+1 Only FS-536/537 as per configuration. But....
https://www.scribd.com/document/336996567/Bizhub-958-808-758-Spec-Sheet-En
Its a trick to get them on there but the hared blue AA2J560000 rollers last forever. Been using them on the 4 series paper feed separation and the feed rollers last up to and past 150K. Using that...
Make sure that the connectors between the punch and FSCB are seated properly. Had badly seated connectors causing this code before.
Hi please post the meter counter page to check the setting.
+1. Someone is getting screwed over.
I have been asked this from dodgy end-users before.
Think there is something wrong with that link.
Look for locally for any surge protector plugs that includes Ethernet surge(Network surge) protection.
Or phone a Konica Minolta, Kyocera, or RICOH dealer nearby and ask what they use.
I liked...
Have you check the small timing belt on the motor for damage?
Here goes the first one for me. Looks like I could have a problem buying it locally from KMSA. The ZA shop does not show any pricing. Useless...
We are a small company supporting a couple of large...
Clearline is a brand I trust. NOt sure if they are limited to ZA.
They are all build with the same basic components so it depends on reputation. Here our OEM suppliers sells us there branded...
Ok silly I am...
Figured it out but wow yea for a site selling UI's the UI sucks a bit.
Sure I will get stuck somewhere else again.
Anyway may be a good place to ask about the experience...
I am new to all this but managed to get google connector working, kind of. Its a trail version and does not stay logged in to the google account but works great on testing. I can see it gives you a...
Check if the registration sensor flag is not stuck or use sensor check in service mode.
Is there any image on the page and registered correctly?
Yea that is strange.
All I can think of is that there could be a latent charge form the yellow and cyan toner on the transfer belt. The black is always running against the TBU and could pick up...
It looks like the edge of the page. I am familiar with the internal printout. It looks like soiling more than lines to me.
Would be better if the OP can upload a PDF instead.
This is where 3D printed gears would be handy.
How is the condition of your fuser sleeve and pressure roller?