Look on the display where it says part is open. There should be an arrow pointing to the open component. If there is no arrow, check the little electrical connectors between the finisher and the...
Type: Posts; User: DelawareJim
Look on the display where it says part is open. There should be an arrow pointing to the open component. If there is no arrow, check the little electrical connectors between the finisher and the...
I'm guessing your issue was indeed caused by using the c250 toner. You may not know this, but you can swap that black drum with any of the color drum units (simply swap the chips). This may help you...
We've had Papercut on C3850, 4050/4750, and a c454e. Had to format the hard drive on each.
We have seen 3 times, a bad CCD lens assembly cause a similar issue.
Just a couple thoughts. What is the Total number of copies/prints on this machine? That might be important if it is in the millions?
First, just to try something, do a trouble reset. I have seen...
We have seen a similar issue with scanning, replaced the CCD to solve.
Twice we have seen this issue caused by a bad motor M4. Located rear of copier, upper left corner (above the fuser drive assembly). It is part number A5C1M10500. Shown in the parts manual on the...
We could pull a complete SD511 out of a lightly used FS534 finisher and send you the complete "kit". I even think it would ship UPS. So it would be pretty cheap for you. Would also include the...
We have had 2 copiers with same issue. Swapped in a used CCD and that solved it both times. A C224e and a C554.
We just had a C364 with the same symptoms - especially first thing in the morning. We swapped in a CCD assembly, wire harness, and the circuit board that supports the CCD and that solved it. And just...
I assume that the first sample picture is running landscape and it is a print. All of the colors drop off sharply towards that one direction. That would have to be something common to all colors...my...
Jim in Dover Delaware chiming in. I am in no way an engineer, just a Konica Minolta copier tech for 30 years. If you listen closely, you can hear that annoying "buzz" sound on just about every copier...
If the thin magenta line is close to the top or the bottom of your copy, turn the stack of new white paper in the paper drawer from "portrait" to "landscape". The magenta line would still be formed,...
Hello Greece! If your tires are not turning, please be advised there is a little teeny tiny pin located in each steel shaft and behind the 1-way bearing. On your parts diagram, look at part number...
I have a brand new fuser sitting in a box. I have no idea what model it goes to. Please look at some pics and help me figure this out. 51078510795108051081Thanks !!!!
I would say that the magenta developer unit is causing this issue. It would have zero to do with the transfer belt. They are completely separate items. Cheap way to fix this: Order a bag of...
You can also reformat the hard drive. This seems to take care of that message.:)
In Windows, search "turn windows features ON OFF control panel". Click on it and it should bring up the small box called Windows Features. Scroll down to: "SMB 1.0/CIFS file sharing support". You...
Jamming from tray 3 and/ or tray 4. Pull down the side door, and lightly roll upwards on the black transport roller. It should roll upwards easily. If it is hard to roll, suspect the 1-way clutch...
Copylite part number: BLB554
Hey guys, just to clarify on the c554 and c554e and 554, are you saying to remove the aluminum cleaning roller and leave it out? Also, are you saying to leave the brush roller in? Thanks
Seems to me, a few years ago...we had 3 or 4 that were throwing document feeder codes and it turned out we simply had to re-format the hard drive. I know, I know, it seems a little crazy but it...
Hey everyone, I am looking for some movie data files for C368, C227 color and mono 224e, 227, and 454e. I will gladly pay for these. I would love to have someone send me the files on 5 different usb...
Hello, I'm a Konica Minolta tech trying to help a small church with a pretty old copier. 10-505.00 and 4-562.00 are showing as faults, also copier is not available and now warming up messages. I can...
Check out this color quality guide. Might help you out. Especially the Blurry/Blotchy copies area.38117