Search:

Hey I'm looking for a parts manual for the RU515, I have the mainframe but it doesn't have accessories. Bought a used C659 and FS537 and it's missing the exit guide on the lid of the RU 515 which...

Has anyone been able to source drums,blades and PCR to repair these since they are in short supply? Lines on PCR from a failing blade.

Do the TN711 and TN713 work interchangeably in a pinch?

Looking for a Service manual for this model.

Hi guys I bought an off lease C659 with an FS 537 RU515 interchange. The RU515 is missing the upper exit guide plate which is a moveable plate on a mounting piece. I have the mainframe parts guide...

Couldn't find my samples to share but the plain is 75gsm. Anything 105 GSM and up has the separations apparent, inconsistently, 2-3 are fine,then one with separation then normal....

Hi all, I've been randomly getting random color separation only when printing on thick setting,never on plain. Have tried swapping ITB and fuser with a sister unit beside it,NG. All units are within...

Apologies since this is an old topic,but wondering if you full time Ricoh gurus know if pump rebuilds work and the best source for rebuild parts? Also how cross compatible are the k pumps from...

I just got a c659 in with 80k total meter with no issues but noticed this model has charge rollers instead of coronas. What's the likelihood of these IU's going yield? I have a lot of experience with...

Tried both 5810 to no avail. As far as anyone knows code just appeared, no fuser damage other than the thermistors seem worn through. I have some "reset" fuses, pico. 1/16 A. Do I need the fuse as...

Hi all, I've got this MPC3002 with error SC571-00. 5810 doesn't reset and the PR thermistors are pretty torn up. Just wondering if the thermistors are a probable fix and is there a spacial procedure...

I have a used FS534 on a C754e with grooved alignment plates. Just wondering if I acquire all the mod parts,how long do they last and how difficult are they to put in?

Hi all, I have this error and have confirmed that the silver position mark is there and clean. The problem is I'm not sure where to begin finding the sensor for it or how to remove the ITB. Thanks in...

Turn off ecm and set speed to 9600, these settings give the best oppurtunity for success when using digital lines. Faxes don't like packets, :confused:

Yes to 3050ci, its older but PF assemblies are very close mechanically ecxept for the sep roller. Have some extra time and might give it a try.

Does anyone know if the paper feed assemblies from a 4551ci will work in a 30/35 ppm taskalpha as the roller replacement is much easier.

You might check for a bent lift plate, I've seen this on many brands.

concerning access to LMS, is it necessary to be affiliated with Minolta officially or is it something which has a work-around? I have purchased 2 C754e series machines with 400k or so, but am unable...

Does anyone else have this problem, see attached.

If they like KM color output, be careful. The Kyoceras do not lay down heavy color. As far as color profiles, good luck, they are not exactly the same as Ricoh, Konica, etc.

Trying to find a source for these .

Looking for some feedback from anyone who has seen the print quality of these "factory new" WC7556 popping up recently.

tried cache clear and logical format, NG. Also, the network settings tab #5 in menu doesn't show and sometimes while navigating through the user/admin screens on the machine, it will freeze up and...

Sudden problem of not printing. It will ping and I've tried to get a new address. The network settings tab is not in the menu. Also unable to login to Pagescope as admin.

I was wrong, it's not metal. plastic, pn A3EPPP3E01. FS527 was metal.
Thanks for all the input.