Have you been able to update your printer's firmware?
This is the same Konica Minolta Bizhub C224e printer.
Its procedure and the firmware file are the same!
Are you a serviceman?
If you...
Type: Posts; User: artfer
Have you been able to update your printer's firmware?
This is the same Konica Minolta Bizhub C224e printer.
Its procedure and the firmware file are the same!
Are you a serviceman?
If you...
I have a Bizhub C308 reset file (a789be.tar) but it dosen't work. I think I need some files more!
If such a thing occurs in a Bizhub C224 series, I simply apply the firmware reset (A145FW.TAR) and the CE Password goes back to the default. I believe there must be something similar for the Bizhub...
This is an imported equipment from the United States and came with the password changed. I am an independent technician and I do not have access to authorized konica in my region ...
I only need...
Have a Konica Bizhub C308 that has a missed serviceman password. I'm a self-employed technician from Brazil and don't have Konica's access. Need the step-step and the files to procedure the reset...
it´s needed to make firmware recovery or it may be a defective NVRAM, you will need to call your sevice representative to do this.
Yes, but this information isn't on service manual. See attachment.
I"m looking for IM4511 firmware, someone can help me?
artfer3@hotmail.com
Tanks in advance.
Artur Fernando
Are you still looking for this CD?
Let me know.
I would like to receive this manuals
artfer3@hotmail.com
I Have some Konica Minolta, Ricoh, Sharp, Samsung and HP for trade if you want.
Thanks
I have some konicaminolta and other machines manuals for trade, I'm looking for Océ manuals (the only I have is Océ 7055 wide format).
Thanks guys, I got it.
If someone wants it, email me.
Hi Guys,
the Problem was switch 12-02, it disables the jam detection.
thanks for all.
Please,
Need service and parts manual for an old océ 7055 wide format copier.
Any help will be appretiated,
Thanks in advance.
Artur Fernando
(artfer3@hotmail.com)
I heve one english manual, do you want it?
mail me (artfer3@hotmail.com)
The DI-1611 / DI-2011 DV Collars are the same as this one and have part number on the parts manual.
turn the machine on with the utility key pressed.
Have worked on a BHP-1050 for several time and did not achieve resolve this malfunction.
When a misfeed or a paperjam occur, the machine makes a crazy free run for a while and then shows a 46-14...
This is caused by a IU tired drum cleaning blade, if you meet a separated one, change it. If no change the IU.
You can achieve those blades on old discharged IUs.
Good luck!!!!
Thanks for all, I got it. If anyone wants it, post to me.
I think its may be the DS Collars or the Mag Roller magnectic pole in wrong position. Check drum grounding and Bias contact too.
Are you still looking for this system software?
send me a PM. May be I can help you.
Please, I'm looking for PI-5500 (on a DI-450) System Software. It does not starts its operational system.
Thanks in advance for all that may help me.
Artur Fernando
Betim - Minas Gerais
Brasil
please, can you scan these test prints and send them to me.
artfer3@hotmail.com