Thank you so much for your help! Really appreciated!
Type: Posts; User: delboy10
Thank you so much for your help! Really appreciated!
Yes I did. Thank you.
Thank you for the info. I work for KM authorized dealer so I have no access to Ricoh.
Would someone help me with Ricoh MP 5055 service manual? Thank you.
Hello,
Would someone tell me what is the life count of the Drum, developer and Fuser for this model? Thank you.
You are right about valid email for authentication. You can check out this link and send it to them.:
How to set up a multifunction device or application to send email using Office 365 | Microsoft...
The part number is
A0ED102800
You can check the attached to confirm.
delboy
Thank you so much for the information! However, it is not available in North America Market!!!
delboy
Hello,
Unfortunately, I could not find the ribbon cable. Anyway, I don't know if it would help but I can confirm you can use the 4e control panel for the 4 series with updated firmware to emulate...
Hello and thanks for replying. Would you able to share how you get it to work? I was in contact with Hytec Dealer Services to inquire about the repair of the panel. I talked to one of the tech and...
Hello all,
I have a Bizhub C224 non e that throw a code C-D411 and I found where the problem is. It is the ribbon cable that connect the control panel PCB to the keypad and sub power part. ...
We are having a same issue here. What base f/w you have to roll back? And for what is the exact model?
Thank you!
delboy
Hello,
You can try this in service mode and see if this would help.
Copier_Test Routines_NVM Read/Write
110_070 LD Power Black
Change the default value to higher. You might have to max...
This may sound a little odd but from your image I would try to use a good (smooth) quality paper to see how the print out look.
delboy
Nice! Thanks for the tips.
delboy
Your new ITB is for the black and white model part #A61DR70000 ( Bizhub 454e).
You have to order a proper ITB for the color model Part # A161R71300 (Bizhub C454e).
If you stuck you can try to...
Thank you all for replying.
The machine has the Hard Drive and I did not disconnect it when I did the firmware. The thing I did not get is the Reboot process with Japanese text ect... when you...
Hello dirtyfingers,
Thanks for the info.
We just had one 224e with the display freeze at the "shark fin". So We order the MFP board and go through the steps to how to replace the MFP board. ...
Are you still looking for one?
delboy
Hello,
You should check the actual duplex unit (Transport Unit) the one right under the scanner. Check for loose connection there. You have to take out the fuser unit and the left side cover before...
I look up the code in the book but I can not find that network error code 162. I would wait for KM tech to verify the firmware. However, the web interface you see I think is set as List Function...
Hello,
Can you verify if the network error code display setting is turned on in the machine? I think all the new machine come with this turn off by default. You can check by log in the machine...
Hello,
Try Fax Par#183 color attachment select multi instead of single; Also, in scanner setting change file type for color/gray from jpeg to pdf.
That should fix your problem. These setting are...
Hello Mojorolla,
I just start to use gmx mail for the older panasonic machine. It works but it take forever to receive a mail from the gmx smtp server. I even try to send mail from the web with...
Hello,
I guess you did try to print with in the Pagescope Mobile App. I don't know if you hear about Airprint Activator for Windows? You can try it. I tried and it works pretty good (Windows XP Pro...