[LIST]
Under what circumstances should the unit brake, what is its function?
Type: Posts; User: TEST10
[LIST]
Under what circumstances should the unit brake, what is its function?
Could you please explain to me what function this solenoid has, because when I disconnect it I recover the black printing!
guys, could you help me, manual for Sharp MX-M904, Thanks in advance
no, probe 2, which borrows from equipment currently working, with normal TRC measurements (In fact, I had to cover the toner input because if I didn't recharge them with toner)
it does not stop feeding toner, since the tcr reading is very low 2
change
imaging unit M(x2)
PRCB
PHRYB
The lines of the connector of the unit to the PHRYB give continuity...
I even put...
I couldn't locate it because the translator put me (afilado)
...thank you very much, and I hope grandma has a great time here!
Greetings colleagues, not very familiar with sharp equipment, in my country it is rare and the company that is selling left the brand representation, with which the client was left helpless, I will...
Greetings colleagues, not very familiar with Sharp equipment, in my country it is rare and the company that is selling left the brand representation, with which the client was left helpless, I will...
Greetings colleagues, not very familiar with sharp equipment, in my country it is rare and the company that is selling left the brand representation, with which the client was left helpless, I will...
I will try first in a parts machine, see the best way to disassemble it, because if it looks delicate!
Because I can't find the spare part a2x0r70600
We'll see how things go, I'll comment on the...
Now...after updating the firmware, I saw the P14 warning, I did the Skew adjustment routine, the P14 disappeared, but now P31(Encoder sensor malfunction) appears, I try to do [Sensor Check], I try...
Thanks, everything turned out as you said, D1 solved with cleaning glass and the problem of freezing the fiery, also solved with cleaning and thermal paste.
thanks for the help, I'll check it as you tell me, I can deduce then that the fiery has a problem, that it won't let me print and the message (maintenance required) has nothing to do with it!
...I'm a bit confused, with this message...because it appears on the display of the fiery, not like this on the machine, looking at the command workstation, it appears the same way. I disabled the...
Hi, any reference to this message
Thanks for the help
C654e
Thanks for the help,
a counter of just under 500k,
c654e58123, fw A2X00Y0-F000-G00-K7...is there an update, help me?
58114We have repeatedly had this same failure, in different c654 machines, without a solution...We have followed the normal course, of discarding, with another machine without problem, exchanging...
I have already achieved a large part ... now I can't print, the IP is fine, it must be the interface
help to restore configuration, some utility options do not appear and no copy windows, no scanner and so on
IRA 8505, ADF does not appear, ... no code
I have no idea how it happened
It may be a limited function, how could I restore it?
Any ideas, thanks in advance!
thanks it was very helpful
Thank you very much, reviewing the part numbers I found this publication prior to the rest ...
thanks again
C654e jams - actuator removal?
54526please, i need the part number of the actuator of the sensors that are entering the fuser of a KM c654.
that piece falls apart practically impossible to repair, and in the second-hand market...
...the display is distorted, as if it were affected by an interference, (I tried to share photos but I can't, any tips about it)54528
I changed the entire display and the problem continues,
(I...