replaced dv and dk and carried out the
calibrations, the machine runs for a few days and the defect reappears
run U132 and calibrate again, the printouts return decent and rewind
not have a code...
Type: Posts; User: avio2
replaced dv and dk and carried out the
calibrations, the machine runs for a few days and the defect reappears
run U132 and calibrate again, the printouts return decent and rewind
not have a code...
tape iks remover and crtridge toner work
i already did 2 time
now : manual stirring oly i.u and machine work , only TCR 6,2 but this is bad!!!!!
total couter 5000 and 3 i.u k
hello , i have raed now aftwer open a 3d , anyone solution a problem?:pazzo:
i hate this model( and service tech site ), replace 2 new iu k , agg fw at last version and forced fast stiiring
but work 2 week ang again error tcr k% at 10%:mad:
now have another shit whit...
hello anyone have exactly passage for set copy bw for default?
we tried both from the administrator menu in standard copy and in quick copy but random back in colors
Has anyone already...
1 ° before replacing the units was the defect the same?
however it happened to me on a 3206 utax after replacing the toner drive and drive unit having had to remove all the back, hvt and the...
302N494080 code poer supply and pics with signed whit X transformed damage
anyone know how find it?
i think this is the problem
https://www.copytechnet.com/forums/kyocera-mita-copystar/161228-utax-350ci-clenaning-belt-problem.html?highlight=
dv unit is news?
before change dv and dk have turno off and disconect ac cable?
ok thanks
however the discharge grilles are clean and the fuser is good(very very strange:D)
were is it? in the last t.b. from utax for 2507ci=2553 olny remedy for c2840 is this:
Corrective measures for service call error C2840 “Belt cleaning motor error”.In case the print pattern is...
[CITAZIONE=Ropariva;2151699]Haha. Hai provato a smontare una di queste cinghie di trasferimento? Nessuna possibilità che tornerà mai insieme.
Ho scoperto che posso allungare un po' la vita pulendo...
so it's hard to help you, what tests have you done? from memory, for example, the rear pin of the document lifting plate may be broken
for gray line i have disassembly cleaning , cleaning all and remove paper dust and toner, removed encrustations from the metal roller and replaced the brush roller with a used one and it seems to...
strange IH it should not center with the belt but with the fuser
strange , image printed not have a problem , if blade rotate bad it should stain
first gray line:total paged printed : 200k , 150k bk 50k col
last fw version
cleaning motor tested ok
checked waste box ass'y rear...
check the contact spring dv dk-mc for me
sensor lever is 9
hello, i'm very donkey whit mac and i want offer a this rebuilt but on diver site i can not find a driver for mac os sierra but only this , this work?
Mac Universal Driver (5.3_2021.10.06)
...
yes ,microinteruptor bad
i think cleaning ass'y DRM clogged, check the waste hopper gears
silent mode is for temp fus and not cicle after last print when machine go to stand by
for ghost print set u161 print +165 or 170 and PRAY
if this is new c8025
small mark whit marker all drum and all cilinder developing and check if this turn (if not i think drive)
check pwb contact for transfert
check hvt