Search:

I have an HP LJ MFP 432fdn that prints garbage non stop. The device is connected to a Windows 11 computer (with the lastest updates installed as of today). So far the following have been tried


...

Hi Everyone

easy one for today... can anybody tell me what the Kyocera model of the Triumph Adler P-C3565i MFP is. Added bonus would be if you can help with the maintenance kit and/or fuser kit...

I'm getting error 33.05.23 on a HP PageWide P77940

According to the manuals, all you need to do is to restart the machine it will clear itself, but it doesnt. The machine does boot up on the odd...

Thanks for input. Much appreciated. To answer questions:

Meter: 1.7 million in a 40/60 split for color/mono

I have tried the PG10 on single colors - no problem

I did not check if the...

Hey guys

need some suggestions with a pretty baffling problem. See Sample 1 for problem. Note arrows at bottom of page indicating feed direction of the paper when printing.

49041
49040

I...

Hey guys

need some suggestions with a pretty baffling problem. See Sample 1 for problem. Note arrows at bottom of page indicating feed direction of the paper when printing.

49041
49040

I...

Thank you for advise.

I did try another fuser but same problem.

In the end, I stripped the main drive and cleaned the excess grease on the big gear. this is also a known problem, but with...

Strange issue with a machine giving 014C jam code. I've been to site 5 times, and I've seen it jam, but it would just stop jamming and run fine for a while and then it starts again to jam every 2 to...

Hi everyone

I know she's an old lady, but I've come across 2x iR2530's with low mileage for a very good price that I'm hoping to restore a bit and sell off for a small profit. The problem that i...

Hi

Does anybody know how to access the service mode on the new iRC3025/3025i?

I work as a freelance tech and I'm installing one today. Would like to access service mode to print the PG samples...

Hi

Anybody ever had an issue with the Kyocera M6526CDN spilling toner on printed pages? It is not on every page. In a run of 10 pages maybe 2 pages will have a blotch of toner on it. It seems to...

Still no joy I'm afraid. I'm not so certain if my problem is the username and password, because this is saved as part of the address book entry on the MFD, along with the IP Address of the Mac and...

Hi Guys

Can anyone help me with this. I'm having no joy setting up scanning to a shared folder on a MAC 10.8 from a Canon iRC1028.... the same copier scans fine to a Windows 7 Box. In the interim...

Hi Every1

I had a iR3235N with a E248 error code. The manual said replace the main PCB but this did not solve the problem. From there we replaced the Hard drive and this solved the problem with...

Hi

I have a customer with a C220. We've been having a recurring problem with the colors fading from one side of the sheet and progressively gets worse. Prints are single sided, and contain a lot...

Hi Guys

I have a HP LJ4350 creasing the pages. It does this from all trays. I must add that it only does this when feeding used paper. The machine currently has 128K on it. My customer has been...

I got them from the local convenience store on the corner....... :) Same place where we get all our equipment from. Imported from the OEM in Europe. I highly doubt the problem is on the fax kits...

Thanks for all the tips and info, but i've tried all of it including upgrade to v3 system software. still no joy

Hi,

I have an iR5065 with a E611-000 code. According to my info it is a SRAM failure. What bothers me, is that the machine works fine if you disconnect the optional fax kit. This is the second...

Hi MsArtDirector

It is a bit difficult for me to comment on your thread. Things is, there are different types of mailboxes and many different ways to configure, and use these, and based on the...

Thanks for that Friend, but i hate to burst your bubble, but this modified spring does not work. The FS1118 is one of the best sellers that we ever had, so we have hundreds of them if not thousands,...

I had a look at all the fixes in SP2 but it didn't mentioned anything about my problem, but hey, like you said you "Its worth a shot". Will give it a try, and let you know. Thanks

Hi everyone

I'm hoping somebody can help with a printing problem that i have with Excel 2007. My customer is setup to print to a secured mailbox. If one user creates a Excel document on his/her...

Hi

Can anybody help with getting into the service mode of the HP 2840 and to reset the the device back to factory defaults. I have a machine from a customer that is totally wasted and i want to...

Good Day All

I have several Kyocera FS2020D machines out in the field that comes up with the "Toner Empty" message, but they all have a lot of toner left. Even when replacing the toner conatiner,...