Search:

Yes i saw it , good find, but that is not the case i have , thanks for reply , tmaged pointed to me and i described it in post above.

Yes ,thats the one (searched several times through the bulletins but missed it every time), thanks. I probably missed it because name of the bulletin (Corrective measures for displaying the lower...

Hy to all

I am curious does anyone have permanent solution for replace toner message on device after toner has been replaced. But problem is somewhere in interlock switch because after front door...

Hy to all

I would like to ask if somebody had this case;
Device works normally and print is ok but sporadically printer prints all black page and because high coverage jams after reset works...

Hy


I think you need CF card that is formatted in device first then you put one file at the time if im not mistaken, didnt done this for a while.

Poslano sa mog SM-N960F koristeći Tapatalk

Hy
Files go to the root(folders) , than you search in menu maintenance option and Enter it from menu.



Poslano sa mog SM-N960F koristeći Tapatalk

You can alco remove drawer and check inside of machine, many times i found lost spring there

Poslano sa mog SM-N960F koristeći Tapatalk

That spring has to be there if it isnt that your reason for jams

Poslano sa mog SM-N960F koristeći Tapatalk

That spring is pulling registration actuator so that actuator can work properly, will affect all drawers, without spring actuator sometime does not go back in position and machine call s error.
...

Hy, check the spring on left side on registration actuator. (number 18 on picture) https://uploads.tapatalk-cdn.com/20190403/6d39e553f2df9e5d5c88db5d7110ec73.jpg

Poslano sa mog SM-N960F koristeći...

Thanks, blue dev was shorting and was replaced, with blue drum. customer says that it was examples of yellow band but not visible on the attached example.

Poslano sa mog SM-N960F koristeći...

hy

I already cleaned laser and drum and transfer contacts , i think it must be something electrical

Hy to all

I would like to ask you if someone had similar case to help me . Problem is that in 100 print jobs it prints 2-3 strange printouts (example in attachment)colour lines (all colour) and...

Hy , did you stretch the spring even if it is new spring , in my case even the new spring did not worked , after stretching a bit resolved a problem.

Poslano sa mog SM-N960F koristeći Tapatalk

Hy to all

I would like to hear whats yours cleaning solutions for chargers ? Iuse some kitchen cleaner called Meglio , thats prooved for me as the best result in charger cleaning and removing...

Hy device did not come back to service since then so i presume it works, i had several cases and solved them in the same way. Kyocera made service bulletin from this case and it is the same...

Thanks for this tip , tried swapping whole feed assembly with spring from new device , still was the same , but when i stretched spring so far seems to be working , will test it some more but this...

No , feed is all right , rollers changed preventively and they are new , springs are in place , something causes that drawer is lowered more than it should and printer confuses it self (i presume)...

Hy to all ,

Has anyone had similar case with P6035. Device when printing one page works normally (mented to release drawer slightly after print )but when printing several page (drawer release is...

Hy
background could be from non oem toner replace developer unit and check feed rollers.

Sent from my SM-G935F using Tapatalk

Hy

Massage Install Fuser appears after device restarted works some time, fuser is replaced recconected connectors and checked fuser connector, had anyone have such massage and of course solution...

Thanks for advice, will try to clean polygons.
Best regards
Drazen

Hy, my coustomer has the same symptoms , was it Laser problem as you mentioned , could they be cleaned?

It was long time ago , if i can remember the problem was in the motor that drives drum. Didnt post it!

Thanks for solutions , will check at the customer to resolve problems.

Regards

Dražen