manual dont tell you have to do it.
I guess scanner needs to come of first?
Type: Posts; User: Michko
manual dont tell you have to do it.
I guess scanner needs to come of first?
I have one that sometimes gets internal error after warm up. and the warm up take quite some time.
Can it be TCR error?
It did have crazy tcr values earlier that I got to 6.5-7% with shaking and...
did you have to do anything more?
I still cant get it to work.
Print sercure go to mfp, type in.... error nothing there.
it's like impossible to find parts guide manuals on knova.
Any tips?
Works fine
I have the same issue with a MPC7501 and I can't find whats wrong.
All looks good...
Any luck with this error code?
I got this error on a C224.
Did everything in service manual and the cable that was mentioned here. And the cable from ccd to MFPB.
Ended with new PRCB.
I got this on a C280. SAME issue with white dots on thick3/4 in Cyan.
Dose this work for C284?I have no luck getting custom logo to work..
It was loos transferbelt....
Hey.
I got this strange lines in feed directions in black low density.
It's a new drum and new charger and new black dev. unit.
Recently changed everything in transfer.
Nothing helps...
How can a IU do this?
It's impossible for IU to flip the image, as you can see the yellow to the right did.
Hey.
So I have a machine that gives my client weird prints after a while.
I suspect MFP board and maybe memory ?
Never tried to scan.
12135
yes it is....
but grid and corona are changed a week ago when the service was made. Even developer and drum was changed...
Hey.
I can't find out whats wrong with this machine.... A college did a pm service 750k a week ago and now it looks like this...
I changed separations unit and cleaned everything.
You can...
I have a C500 that gives me this code sometimes... weird.
Didn't find anything strange. I switched motor from right side. See if they get another error code.
Hey guys.
I have a machine that gives me error code C11-90, sometimes. Usually when they print a bigger job.
I have been looking and testing it but I cant find anything strange...
Maybe...