Search:

I just had this exact issue (C458 & FS-536) with either C1102 or J7221 showing up.
1 or more of these symptoms were seen after coding:
- 2 pages on top of the RU
- 1 page would be halfway thru the...

I've just reviewed this Thread & nobody has mentioned these files/tools so here they are:

The attached zip files contain: 1) a Konica Minolta Master Soft switch excel file dated 2017 with details...

BINGO!
Thanks so much
All good after full fw update to latest

Recently I replaced the hdd after it failed & coded. Reloaded latest firmware. ok. I thought.
OCR error came up today.
Now I read in the SM that the OCR data dictionary needs to be replaced after...

I see I never updated this post.
The usual problem is gummed bushings causing increased friction on shafts.
This occurs not only in the Vertical drive assembly but also in the Vertical transport....

We don't usually mess with installed customer units but when they are traded in then we check if fw should be upgraded before reselling or renting them out so that they are 'current'.
I just want to...

I have been reviewing the available downloads on the KM site for the C3350 & noticed that there are no (851 MR11) special versions; the latest are all (803 MR10 based).
However there is 1 reference...

"site:copytechnet.com email address" gave me this thread

I was having the same issue on a used C280 that I am setting up for our office & I did not want to do an All Clear
(which is a known...

THANK YOU occus!!!

The options for ADF Skew are LOW & HIGH & HIGH is the one messing it up.
I maybe was looking through all the adjustments & switched that one.
Would explain why no one else I...

This series of FW is installed to provide support for new TLS & SHA levels for the non "e" machines.
As far as I know Gmail & Office365 do not work without this FW (unless you decrease gmail...

-confirm that NTLM settings are set to v1/v2


-confirm that Workgroup settings are the same

I recently found the following blog article useful. It appears to be a Bizhub 363 that he is setting...

What FW version do you have?
FW GZZ-D1 corrects some toner reset issues.

It's possible that the toner may reset to full if you pull the bottle out & reinsert it as well. I try to only check...

I just happen to have a C250i on hand & office 2016 on my computer.
Watched this video
YouTube
to create a mail merge for envelopes.

Hit print & the copier beeped.
I had put #10 envelopes in...

We are using a traded in C754 for our office machine.
FW is GBS-M0 (iOption or version Firmware UP however you want to call it) as we use GMail.
Life stop Softswitches are: 51=F0; 55=0C
S-0-C /...

Received & unboxed these 2 units & installed DF's on them going thru the usual setup procedures.
After doing the final 4 DF auto adjustments exited & power cycled to save adjustment values....

FYI
I just had an error message while trying to turn CHANGE PERMISSION FOR DEFAULT VALUE to ON.
Culpa Mea - I had an incorrect value for the function version in ssw25 - 20h instead of 10h for...

Just replaced PRCB & Fuser Motor & Main body seems ok. Reflashed PRCB FW GNK-61. 4M+ copies on unit

Now getting the follow issues with the PF-705 (maybe were intermittent before but worse to...

The GDK fw was pulled from the KM's site - I had the pink line too so that was probably the reason.

GHV-M1 should be the minimum fw installed on that model per Bulletin 11472 (possible data loss...

Solution: replacement DCPS/1 restored power to PRCB eliminating that code. Then had to replace Conveyance Drive Board because Loop & Reg rollers would not turn on. Also getting a scanner home sensor...

No results from unplugging power connections that do not go to PRCB or OACB.
Ordered Power board & now PRCB lights up & copier boots to ready.

Now I get jam code J1709 - after initial...

ICP23 is good - there is no voltage to blow it

Harness was checked for continuity & shorts
OACB & PRCB have been replaced

There is no voltage on the DCPS/1 power connectors for PRCB

KM tech...

C8000 / V60-ish fw / 4M+ copies

I need some help troubleshooting code C-C101 no response from PRCB to OACB.
The code occurred while the customer was using the machine not during or immediately...

Try this: Go to Service Mode / System 1 / Initialization
Select "SERVER CACHE DATA"
Hit the Start button
Power cycle the machine when indicated (almost immediately)

from the msds page: note the pairings

Product Name: TNP53/TNP56, TNP54/TNP57, TNP55/TNP58, IUP25/IUP26
used for: bizhub 4702P/4402P/3602P

Check the labels for both types for the words "Use and Return" after the model number
This means there is a Recycling Return label included.

You will probably only find it on one of the 2.