Have you finished removing it completely from the old device, once you've removed it, you then have to print off the deactivation complete code, then enter that into the LMS. Are you using the...
Type: Posts; User: kingarthur
Have you finished removing it completely from the old device, once you've removed it, you then have to print off the deactivation complete code, then enter that into the LMS. Are you using the...
totally get where you're coming from - have always stayed away from universal drivers, could never seem to get account track/user authentication to work. Been getting customers complaining that...
That's why I've put the "Connect to Weather" free app on our office device - that's now the screensaver
Konica Minolta’s Connect to Weather app displays the current weather conditions right on...
We've just got our office device with marketplace on - i play around with it occasionally. I use the free apps, just to experiment, our device displays the weather for the next 4 days :D
it looks to me like you have dirty printheads, all of the colour ones need cleaning. the reason why the "black" has strips when printing in colour, is because it's using all the colours to make the...
in their bulletins KM are now advising to use the universal drivers for printing, as opposed to model specific drivers. when using device specific drivers, we are finding that devices are often...
I'm guessing it's the web browser - try this link, you may need to copy and paste into your browser. You'll need the device s/no lms.konicaminolta.com/LicenseFree/KM/support_free.aspx . Depending on...
Found it - but it looks like it's the "User settings" you can lock - change softswitch 71 to HEX 08 - but you have to use the admin password - sorry to get your hopes up :)
I can't remember how, but I'm sure you can lock the "Utility" section with a password, and then have a separate password for "Administrator setting" - . remove address book from the front screen - so...
if you're going to transport it in a vehicle, try and tie it down, but don't bend the scanner. I've seen a machine, that wasn't tied down, somersault - when the driver braked and the document feeder...
There are different types of storage board, and depending on the type, you will need to load the appropriate FW for that board, for the C250i, for the new Phison storage board, you'll need to load...
Had a C450i with a noisy exit - ran it whilst pushing down the lower exit rollers, so that they weren't turning - the squeak stopped, stripped down the exit unit completely, cleaned and lubed...
set up "user authentication" - put the password/user name into the print driver, then set up "Public user" on the device, so they don't need a password
I'm guessing that when you moved it, what ever part is indicated as open, opened during the move - so close it :)
TBH, I'm not sure that'll make much difference - it's due to the quality of the belts - they're crap, as I said before, it's the same part no on the previous series, but the quality is completely...
I'm assuming the toner is the same, aftermarket DV units will apparently fit the "e" series, "8" series and the "i" series
Yep - same part no - different quality. Don't you have to remove the motor to fit the belt, then tighten the screws once it's in place
less secure apps stopped working a while ago, we had all of our customers, who use gmail, fail within a week of each other - luckily we were prepared and sent them instructions on setting up an app...
it's actually easy to do, it works well, but if you change the gmail password, it deletes the app password. technically you can only use the app password for 1 device, however on the KM, if you use...
Seems to be the easiest, and possibly the obvious choice
as far as I know, you have to use the marketplace installer to remove devices, you'll need the IP, admin password, and the username/account that set it up, then select "Uninstall" 61768
The equivalent for the DF629 in the i-series is DF632 - whether it'd work, i couldn't tell you
As far as I'm aware, the previous owner needs to remove it from their account - probably should've been done before they gave it back
That's what i thjought, but we've got a few customers who can't find that in their drivers
Hi
Can anybody give me the info on how to set up ID & Print to a KM device, from the latest MAC OS. I have a guide, which is years old, and doesn't help anymore
Cheers