I have a few of this model in my company and none of them give me that sound. all is operating as others machine.
Type: Posts; User: Matoku
I have a few of this model in my company and none of them give me that sound. all is operating as others machine.
Sorry Guys. this post rotten already. it more then 10 years ago. now We don't do service on Minolta anymore. :cool::cool:
My Docuwide 3035 today error 046-311.
Solution. I just reconnect all the connector
On AC drive and LVPS. After reseat all and
Switch on the machine working fine. Thanks
Also please check the flat cable connection on hvt board..it happen to me once. I have pulled the flat cable after that this error comes out. I just reconnect it and setuled.
don't know why canon firmware not freeware. others brand we can freely download it and install on the machine.
Unfortunatly I don't have the Instllation Guide for this Model MX-FN25, Anyone Have it can share on Google drive at mel2tobpinai@gmail.com
Thanks
Hi guys
Anyone know how the finisher MX-FN25 for MXM-904 how it should works? I mean is it possibel any softswitch in the simulation code accedently turned OFF that cause the finisher Diseabled.
...
bilyahn Thanks. yes understood. You save my time on this issue.
Thanks a lot kdr363 for your reply. it help a lot.
Hi Guys
MX3140/MX3640N error F2-39 >>
1. Process thermistor trouble.2. Process thermistor harness connection trouble.
3. PCU PWB trouble.
Anyone can tell me where is the Process thermistor...
Hi everyone. anyone here know how to clear this error 33.04.13 on HP Pagewide P77940N. (it shows TPM Locked)
This error comes out after I swap the formater and the engine controller Board from other...
Jfyi. HP manual are separately for service and error code ya. error included in CPMD files
Try Google Translate Sir.
It Look Like your HVT Pwb almost Dead. Before you change it try reconncet all the connecter related to this PWB.
You are right
for Error C3-1414 its the HVT board fault
For Error C3-1312 the main board fault
trust me
For samsung K4250/4350/8128na this is the most I facing problem
Hi everyone
I know this is old post but for future references it good to share my experiance on this problem.
1. I know is even I replace imaging unit and I reinstalled the mantioned idler gear...
Hi Patterson, do you manage to solved this problem on your MX3110?
I have check the paper feed driver pcb and the delivery drive pcb is E1.
But I check the fuse F305 is supply to PCU pwb. (blown fuse) PCU pwb version 2. (F3)
F304 for delivery driver pcb (this...
TQ Copiertech
I will have a look first and will update here later
By the way you still can access the actual meter reading in Sim 22-01 ( or print the sim 22-06 )
Anyone ever experience this error comes out on MX-M904?
L4-31
description - Machine heat-exhaust fan trouble
I runs the Sim6-02 and the exhaust fan running smoothly.
I checked on main...
Hi
Here I just want to update this post after settled the problem.
The solution is I replace the power supply pcb. The 24volt supply is absence. after change it.
The machine Back to Alive.
...
Hi
I have ths K4250RX many error message comes out.
1. OPC Motor Failure #A1-2113
2.FUSER UNIT FAILURE #U1-2115
3. SCANNER IS LOCKED #S3-3121
4.TRAY IS FAILURE #M1-4111
Machine doesn't turn...
I have experience this on X7600GX. The solution is to change the operation penal. may be you can try this.