Are these drums interchangeable? Are there other brands machines that are the same as the OKI C380?
Type: Posts; User: cpress
Are these drums interchangeable? Are there other brands machines that are the same as the OKI C380?
Replaced corotron and it worked!!! Thank You!
I have been servicing my C75 since I quit using Xerox service. I am now getting a 045- 314 code , IOT sequence time over. How serious is this?
I use this machine as a back up to the Ricoh and any...
Searched online for a service manual for this machine with no luck. Any suggestions on where to look
TIA,
David
Hello,
I changed the pcu cleaning unit and need to log in to the skilled operator to reset the counter. I type admin for the user name and nothing for the password and that doesn't work. Is there...
Keeps throwing this code,There was a new 2nd BTR installed a couple weeks ago. It does make a small grinding sound when starting up. The gears on the bar unit look good. Drive motor gears bad...
Hello,
My rip all of a sudden says "video card not installed" when I send a job to the C75. Is the video card bad? A guy tells me a "surge" from the C75 caused the issue. Can I just replace the...
That’s exactly what it was, I made a bushing and it works great now!
My High capacity tray doesn't register , has a 078-261 code. I can't find anything in my service manual with this code. HELP!!!
The tray will lift but nothing else. Any Ideas?
Hello,
My C75 seems to be using a lot of Black toner. Even on light coverage its using a cartridge up fast! Way more than it has in the past. Any ideas as to what I can look at to correct this?...
Anyone know what this is? I can't find anything. Or do you know where I can download a service manual
Put a new one in, cleaned the pad also
It’s showing the 061-319 code also....
Continuing saga again 061-340 code, replaced c,k ros unit same thing again. Flat cables maybe? Interlock switch seems to be ok.
Yes, still the same issue
Xerox tech was in and replaced the board and the cable, neither fixed the problem. I thought I read something about the system Bios battery need to be replaced. Xerox won’t send specialist because we...
This is my unit, the free flow is disconnected at the moment
Which driver do I install to print directly to the c75?
the printer cane with a free flow but we are having issues with it right now and I just want to print from a pc to the printer.
i downloaded...
System back up or config back up
When both the rip and printer are turned on the communicate, when you send job to print it throws the code. Thought about reinstall of software?
Hello,
Getting an error when we go to print from the rip P03-201 on the rip and a 127-212 on the printer.
We have checked all connections, they are fine, even tried a new cable with same result....
After further testing entering 077-115 in the component control I get the High Reading, them inserting a piece of paper and reentering the the 077-115 I don't get the low reading. It is a new...
After doing all the above steps, even replacing the duplex motor. It says to replace the PH Drive PWB. Anyone done this? It seems like a task that's not too difficult. Any tips or suggestions?
Thanks
Disregard the post! I found the problem cables were plugged in the wrong port! Phew!
Thanks
My Free flow rip is throwing this code. We have double and triple checked all the connections, what am I missing?
We had to install a duplex motor on the C75 put it back together printed a sheet and...