Search:

Type: Posts; User: mga

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Re: sd card for ricoh pro ricoh 1107ex can clone it

    Clone sd cards never work properly ie: if you clone a post script 3 sd card you will get strange copy quality problem just use original don't waste your time trying
  2. Replies
    22
    Views
    2,994

    Re: Possible to change factory sp mode on mpc2004ex?

    If the admin and supervisor user password been changed and you can't get into service mode you will need new nvram to reset passwords is in factory service mode then sp5846 46#
  3. Re: Ricoh MP C3003 Slow Print & Copy- one page at a time

    There is a silent mode in user tools see attachment
  4. Replies
    8
    Views
    1,498

    Re: Mp c3003 tray 3 dont work, and make strong noise

    I've had the lift motor making noises tray 3 will be the pedal stall swap with tray 4 motor
  5. Re: Loading Firmware Replaced Hard Drive Canon IRAC 55XXi Series machines

    You have to extract then register on sst the transfer to usb using sst
  6. Replies
    11
    Views
    1,494

    Re: RicohC5503 taking too long process jobs

    It sounds like network. But reinstall with ricoh driver and take of WSD if Microsoft has done update and change also update firmware there's been some power saving updates
  7. Replies
    5
    Views
    3,048

    [Error Code] Re: Canon IRA-C5540i error E000025-0451

    Could be developed assy what's the copy quality of the page that comes out
  8. Replies
    9
    Views
    2,947

    Re: Admin Password Reset Process in Factory SP Mode

    You have to do on machine it's easy if you are a credited ricoh engineer
  9. Re: Anyone know if the Fusor's Nip Pad has a part reference?

    Don't use compatible parts they rubbish and don't work waste of time and money just buy original sleeve assy
  10. Re: IM4000 stuck on "Waiting for firmware update data"

    I only update via sd card engineers should have control of this sort of work @remote and user doing updates is asking for trouble
  11. Thread: Alternate Counter

    by mga
    Replies
    4
    Views
    601

    Re: Alternate Counter

    Ricoh and some dealers rewrite the nvram you can usually tell when this has been done as the parts pm life doesn't match the volume of the machine
  12. Replies
    7
    Views
    843

    Re: MPC6502 Toners?????

    They not cheap I have a half a dozen of these machines you sometimes see them on ebay but they go very quickly ONLY USE ORIGINAL on these models if could drop me a email I may be able to help
  13. Replies
    14
    Views
    1,751

    Re: MPC 307 faulty test sheet

    Hi dave one of the problems you have when you use pcdu's from another machine they don't set up unless you run manually also toner hopper problems always give you faulty add toner sign I would check...
  14. Replies
    17
    Views
    3,773

    [Error Code] Re: mp 5054 with sc 554_2

    Of course the sp fuser reset will be there doesn't matter on any firmware used best to call a credited service engineer you will also need new sleeve assy with comes with a reset fuse
  15. Re: Basic Authentication Microsoft - blocked from September 1, 2022

    I think Google has put this on hold for now I was advised by Konica technical support yesterday so I tried it opened new account and less secure apps was there and work if think the accounts where...
  16. Replies
    9
    Views
    1,169

    Re: C4503 fuser sleeve in C4504?

    This is a compatible sleeve ricoh do not supply it rubbish
  17. Thread: MPC VS IMC

    by mga
    Replies
    9
    Views
    2,460

    Re: MPC VS IMC

    Iam finding the IMC are more reliable also the parts are slightly cheaper toners are the same it's still a metis series
  18. Replies
    12
    Views
    1,879

    Re: mpc4503 paper internal exit tray curling

    If the machine is a used machine and once had a finisher installed yes you have to replace back to machine only exit roller assy. When fitting a bridge unit or internal finisher you get a roller assy...
  19. Replies
    2
    Views
    1,304

    Re: Tray 1 not lifting Canon iradvc 3525

    On this model best to check lift motor or one of the sensors here's a part layout guide
  20. Re: Canon irc3380 control panel and touchscreen not responding

    Sounds like you need a new control panel
  21. Thread: Canon DX C5760i

    by mga
    Replies
    1
    Views
    891

    Re: Canon DX C5760i

    Try user copier tech on CTN or try making a contribution to this site it helps
  22. Thread: New

    by mga
    Replies
    9
    Views
    1,302

    Re: New

    Hello
  23. Re: What tyoe of SD card I need to update a MP2851 ? Manual doesn't say

    I've always used a basic 2gd sd card not hd etc I've never had a problem don't use remotely it's rubbish don't for files must be extended and files need to put in folder called romdata
  24. Replies
    1
    Views
    615

    Re: Fiery Y1 for a iRA8585

    This machine isn't old enough not be available you will be able to get from Canon there sims site is down at the moment I will double check tomorrow.
  25. Replies
    3
    Views
    1,077

    Re: 6002 fuser in a 6503

    I know the thermistors are different but the rollers etc are the same
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4