Clone sd cards never work properly ie: if you clone a post script 3 sd card you will get strange copy quality problem just use original don't waste your time trying
Type: Posts; User: mga
Clone sd cards never work properly ie: if you clone a post script 3 sd card you will get strange copy quality problem just use original don't waste your time trying
If the admin and supervisor user password been changed and you can't get into service mode you will need new nvram to reset passwords is in factory service mode then sp5846 46#
There is a silent mode in user tools see attachment
I've had the lift motor making noises tray 3 will be the pedal stall swap with tray 4 motor
You have to extract then register on sst the transfer to usb using sst
It sounds like network. But reinstall with ricoh driver and take of WSD if Microsoft has done update and change also update firmware there's been some power saving updates
Could be developed assy what's the copy quality of the page that comes out
You have to do on machine it's easy if you are a credited ricoh engineer
Don't use compatible parts they rubbish and don't work waste of time and money just buy original sleeve assy
I only update via sd card engineers should have control of this sort of work @remote and user doing updates is asking for trouble
Ricoh and some dealers rewrite the nvram you can usually tell when this has been done as the parts pm life doesn't match the volume of the machine
They not cheap I have a half a dozen of these machines you sometimes see them on ebay but they go very quickly ONLY USE ORIGINAL on these models if could drop me a email I may be able to help
Hi dave one of the problems you have when you use pcdu's from another machine they don't set up unless you run manually also toner hopper problems always give you faulty add toner sign I would check...
Of course the sp fuser reset will be there doesn't matter on any firmware used best to call a credited service engineer you will also need new sleeve assy with comes with a reset fuse
I think Google has put this on hold for now I was advised by Konica technical support yesterday so I tried it opened new account and less secure apps was there and work if think the accounts where...
This is a compatible sleeve ricoh do not supply it rubbish
Iam finding the IMC are more reliable also the parts are slightly cheaper toners are the same it's still a metis series
If the machine is a used machine and once had a finisher installed yes you have to replace back to machine only exit roller assy. When fitting a bridge unit or internal finisher you get a roller assy...
On this model best to check lift motor or one of the sensors here's a part layout guide
Sounds like you need a new control panel
Try user copier tech on CTN or try making a contribution to this site it helps
Hello
I've always used a basic 2gd sd card not hd etc I've never had a problem don't use remotely it's rubbish don't for files must be extended and files need to put in folder called romdata
This machine isn't old enough not be available you will be able to get from Canon there sims site is down at the moment I will double check tomorrow.
I know the thermistors are different but the rollers etc are the same