You have PM..
Type: Posts; User: Brizey
You have PM..
Sorry I have been AFK, Yes I have firmware..
6LE78259000 HRNS-FRT-364
easy as 1,2,3.
You should have it now Will.
My old post seem to have got lost in limbo..
PM me your email and I will help you out with the 232, I only have 232 firmware hosted at the moment, I can host 350/450 and 230 firmware tomorrrow.
...
I have sent you an email step by step on how to do it. inc HDD types, USB format types and codes to update the firmware on the HDD
I have also linked you to my personal collection of current...
Where abouts are you in the world?
I can help you.
Ok now I need you to do the following :)
From the main copy screen follow this order.
-Press 'User Functions'
-Then 'Counter'
-Then 'Department Setting'
-Enter the Admin password (123456)...
Do you have a hole punch and a finisher?
Because there is a CC60 which is a hole punch motor abnormality?
Yes for sure, i am currently at the warehouse at the moment, but as soon as im back in the office i will reply and send you a few pages out of the service manual for future referance.
B.
Ok, there is no way you can do it unless you take on board what others have said.
-Department codes with colour and b/w limits.
-08-252 and set a PM value for 'Time for periodical maintenance' to...
If your just wanting to scan documents you can scan them locally on the HDD of the copier and just access them on there.
Which means you can cut and paste them onto your computer, from there you...
Or you can do it the easy way and take of the back/panel and the LHS cover under the exit tray, take off 1 loom and 1 ribbon cable, undo 1 screw that hold the laser in place and slide out the whole...
Try this,
-Hold down 0+5 while turning the power on and hold till it beeps.
-Press 4 then the fax button
-Place the printed chart on the glass with the 2 black vertical blocks towards the scan...
As sneeky suggested, create and enable department codes in TopAcess and set a copy limit of 10,000
:o