SO, That's where our missing toner is !!
Type: Posts; User: CraigW
SO, That's where our missing toner is !!
Yes, Since High School
New would be great... Used would work, if in good order.
Anyone have a extra Konicaminolta mask for sale ??
Lost my original mask... sadly.
Thanks !!
Yes, The black gear side platin clip.
We found a good platin at the shop.... Hoped to get the broken one back in operation.
Thanks for reply !
Have a broken clip (the difficult side....of course)
Any help would be great !!
Have replacement clips on hand.
Thanks !!!
Thanks for a help, much appreciated !!!
Searched high & low for the cleaners part #s.
They don't last very long at all..... and, no part number available.
Thanks for any help !!!!
For us it was, the Reversal/Exit assembly.
The boss says no blank pages, and of course..... it is running fine today
Have a 601 coding out, many parts exchanged (supplies) firmware updated. Set for any size & any type, still logs codes. Machine only at 69k.
Thanks for any help !!
The mylar on the FS input can tear causing 72-17s, as well as the input sensor mentioned.
Thanks to all.
Did battle yesterday on DF-621 constant 66-23s again....
Turns out the DEEP hole for the upper reflective, had just enough paper dust present to cause constant 66-23 jamming each attempt.
...
The start date goes to machines original start date ( not to current day) for newly installed OEM drum.
Searched the site no luck.
^^^^ He did that as well.... right before he did main drive assy
That was last item replaced.... no calls / or 2155 codes since then.
My boss did battle with a C3351, having 2155 under warr.
He did M1 with no luck.
The last thing on the list was..... "main drive assy"
Televisions for many years..... Found a local add for tech. 20 years later happy as can be.
Sorry for post hijack but trying to locate new Konica Minolta dress shirts.
Cannot locate them on the site.
Hoping for some directions to locate them.
Thanks !!!!
Thanks for update !!!!
Had a call on a mono 4 series where the bottle would not install, sent it back. Was likely the wrong black cap was installed at factory.
You used the word "print" at the end of the title.... That will cause said symptoms.
Thanks for update....
C364e Goes through sep rollers like crazy (flat spots) roller only last around 90k.
Torque limiter has been replaced twice.
OEM parts.
^^^ Thanks for the info and photo !!