Hey boy, I have firmware.. no worries..
Type: Posts; User: manoj1686
Hey boy, I have firmware.. no worries..
Hi,
I too have same issue. kindly help me out
manoj
Thank you Mr. biplabdas26185, I also had the same issue and taken a chance to replace the EEProm and it was a wonder. I am sorted without any change isn Serial number and total count of the machine.
Then what is that password Mr. RRohan, since I am facing the same problem with a BZ C451
please go through http://cp.c-ij.com/en/photoretouch/reference/function/function08.html
TRY F/W GD1-A9 and will fix your problem for ever,
There is a temperory solution:
Pagescope web page ->Admin login -> Network -> SSDP setting -> OFF
KM-2560 Engine PCB for sale (New and shipping extra)
INR- 15,000/- + shipping
Part No- 302H094340
kyocerastorage@gmail.com
am sorry code is E0013-0000
E0013-0000 code shown in IR 6570
am replace Waste toner bottle and clean drum unit and waste pipe
pls help me
@ Eric, could be you might have sorted with FW 12 and I expressed my experience, and we also have got warranty on BLACK DEV an Motor CLNG. But the spots are not only from black drum we are facing...
@ Eric,
The dots are specifically black. and we had sorted about 23 cases of Drum arching by downgrading the F.W. And the bulletin no were indicating about the arching of drum can reduce by...
@ Eric 1968, can you please post the details on Service Bulletin.;)
after using the latest f.w (from version 10) only the arching started,this is my experience, and we started downgrading the machines at lest to version 8, now the damages come down.:)
Hi you can even try this, after replacing the DRUMs ., downgrade the firmware to V.8..
It was done , but after replacing all the imaging units, it produced good copies
If am printing red...magenta and yellow not merging...
how to do colour registration in a CLC 5151,
I Have a KM2560 in my office and my sytems are like XP and W.7 and vista..I am facing a challenge while printing through Windows 7 . It prints for some time and not for some time. Please assist me...
Hi all, please assist me to connect printer controller CNPU H1 to a CLC 5151, I did the connections, is there any specific driver required, I did copier=> option => int -face=>img-cont=> 3
if I get...
thanks to all, b4 the machine was printing on thick media/mode without any issue, until it reaches a life of about 100K copies.
hI
MY TA 250 CI has an issue of fixing while printing on card of 250 gsm, I selected thick media. Replaced with about 5 fuser units, replaced power supply board. still problem persisting.
While...
Try to replace the toner what u using....are you using the genuine toner or sub standard..b4 replacing toner clean and blow the toner inside the dev unit.