Hi, i flash a Bizhub press 1250 printer to the 52 firmware but i got the file for IC Controller (P): A4EW011_00P1_G00_5200.bin that is actually for a 951 and not compatible with the 1250, can someone...
Type: Posts; User: alangraph
Hi, i flash a Bizhub press 1250 printer to the 52 firmware but i got the file for IC Controller (P): A4EW011_00P1_G00_5200.bin that is actually for a 951 and not compatible with the 1250, can someone...
I check the DCPS/2, it was a cooling fan that was blocked.
Thanks.
i have a bizhubpress 1250, when the main power is turned on, the screen show the massage "wait a moment"", for two second and then goes black. the power led remain solid green, and the power save led...
Hi, can you upload the complete PDF? I don't have this one. Thanks.
Enviado desde mi SM-A505G mediante Tapatalk
Hi, your suggestions did clear the error. Thanks.
im having a second problem with this deck. It always Jam paper with code 0107 DELAY Pickup Buffer Sensor, the paper doesn´t reach the sensor, it...
Hi, i have a ImagePress 750 with a pod deck lite c1. After power on the machine report an error and call service rep for de drawer 4 (pod deck lite)
The error is reported as 500-0004, i have tested...
Thanks a Lot. Hard to find. :D
Do you have the parts manual. I can't find it anywhere. Thanks.
Thanks, for your input. I am usign generic toner, not the original. It seems that the developing unit is wearing out faster than expected. I change it and the problem seems to be fixed.
the NCR...
Im having a serious problem with my FS4200 and P3060DN, both show the same exact problem. After print serveral pages some time after 1000 other times after 200 the image begin to fade to almost...
is there any whay tht you can copy and send me a copy of the tech manual to an address in miami. I can send you the money using paypal o western union.
The machine has never power on since i have it. When i power it on the screen remain in the software and display version numbers. It beep twince and stays that way. Also if i open a door in the left...
when i turn on the bokletmaker it does some kind off initial loop, beet twice and the screen remain white. No menus or error codes. I need a way to enter a service menu or something like that to see...
Do you have a service manual for it, i have a colorworks2000 and is failing.