Search:

Press "function" "original size(ledger)" "3" to enter service mode
go to F9-06-04 (ram initialize, fuser reset, power off/on)

E4-01 fuser warm-up normally thermostat or thermistor

GO...

yep, reload firmware..

Clutch

I was thinking E3-11/12 were codes for coronas.

Clutch

Try F7-01

Clutch

2-8 calls per day

$3.17/gallon East Tenn.

Update... power supply board went out this week, probably intermittent before causing errors.

I had a 4510 that would do similiar when duplexing, try to do 3 and jams (J31,J82). Turned out to be duplex drive clutch not installed properly. The slot on the clutch body was not installed in its...

Has anyone run into this on their machines? I replaced fuser 3 weeks ago, but now its back. My supplier says I'm the only one thats had this problem.

You can turn off F5-25 in a pinch if you need to wait on parts.

Clutch

This ended up being a laptop problem. File "msconctl" or something like that was missing. Went to one of the computer wonk sites and downloaded the file.

Copier says "adjusting ,waiting to scan" It needs a firmware update. I downloaded Canon update tool, but when I try to run it I get a 339 run time error on my laptop. I've tried e-mail to Canon,...

Try HG5-1308-000 sep pad. Its softer than the original and works better.

I forgot, if you still need diagram let me know, I'll e-mail you one.

You might try to adjust (bend) the interlock. Seems I had a couple do this and that fixed it. I think the tab gets bent and the switch doesn't make good contact.